อุปกรณ์ปรับแต่งขยายสัญญาณเสียง RANE SM82S Splitter Mixer, 8 inputs, 8 stereo Input channels, 1 st Auxiliary Send, 1 st Auxiliary Return, St input Balance controls
Mono Input Pan controls

The Rane SM 82S Splitter Mixer is a perfect problem solver for musicians, sound reinforcement or fixed installation in bars, clubs or restaurants. There are 8 stereo channels (16 mono) featuring stereo paired 1/4″ phone input connections. Stereo inputs provide complete compatibility with keyboards, CD players, external stereo mixer feeds etc.

Also featured is an effect send and return on every input channel, making it possible to run an effects loop with external reverbs and multi-effects processors. Balance (Left/Right) control is also featured on every channel.

The post Splitter RANE SM82S Splitter / Mixer appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งขยายสัญญาณเสียง RANE SM26S Splitter Mixer, 6 inputs, 6 outputs, 2 main Inputs, 2 main outputs, 6 input Level controls with 6 Mix / Pan controls

The Rane SM26S is a unique, dual purpose mixer capable of mixing audio signals and distributing audio via any of the 6 outputs. There are 6 balanced mono inputs and outputs complete with gain and pan control. Pan controls place the channel’s signal into the stereo field. As a splitter, the Pan controls assign which output channels distribute incoming signal. There is a separate Left and Right stereo input for incoming signals when using the SM26S as a splitter mixer. Also featured are stereo (Left/Right)”Expand” Output for cascading multiple SM26S. There is no maximum limit as to how many SM26S can be linked.

Splitter and Mixer Function

The Rane SM26S is capable of mixing and distributing signals out of 6 mono outputs. There are 6 mono inputs and 6 mono outputs, 2 sets of stereo (L/R) outputs and a set of stereo (L/R) inputs. Both a mixer and audio distributer, the Rane SM26S is flexible and versatile enough for any sound reinforcement application.

High Quality Inputs and Outputs

The SM26S features balanced 1/4″ TRS phone inputs and outputs for maximum gain and lower noise floor.

Mixer Pan Controls

PAN pots are featured on channels 1-6 and control stereo placement of audio when the SM26S mono inputs are in use. As a splitter, the PAN control may be used to assign which outputs distribute the incoming stereo signal.

External Power Supply

The external power supply is effective in reducing noise created by “dirty” AC power and bad grounds.

Features:

• 6 balanced mono inputs, 6 balanced mono outputs
• 2 main balanced Inputs, 2 main balanced outputs
• 6 input Level controls with 6 Mix / Pan controls
• Master Input and Output Level controls
• 10 dBV to +4 dBu shifter
• +4 dBu to –10 dBV shifter

The post Splitter RANE SM26S Splitter / Mixer appeared first on soundspacethai.com.

เครื่องขยายสัญญานหูฟังแบบเข้าแร็คได้  RANE HC6S 6-Channel Stereo Headphone Amplifier สามารถเพิ่มลดระดับเสียงได้แต่ละชาแนล

The Rane HC6S is one of the most indispensable products in today’s audio industry. Featuring six stereo headphone amplifiers, the HC6S performs a number of necessary tasks, not all of which are headphone related.

The HC6S provides Master stereo Inputs which can be used to drive any or all of the 6 stereo headphone amplifiers. A Mono switch on the front panel drives both channels of all 6 amplifiers from a common mono source. Six individual unbalanced stereo Inputs are available to drive any individual amplifier from a separate stereo source. These Inputs can be converted to mono balanced Inputs through internal jumpers if required. Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side. Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear.

The HC6S is capable of delivering up to 500 milliwatts into headphones with rated impedances between 32-600 Ω. The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit. Under most conditions, the HC6S produces sound pressure levels in excess of 120 dB, more than adequate for most listeners.

Features:

• 6 independent stereo headphone amplifiers
• Master balanced or unbalanced stereo inputs with Master Level
• Six unbalanced stereo Inputs can drive each amplifier
• Front and rear Output jacks
• Six Output Level controls
• Stereo / Mono switch

The post แอมป์ขยายหูฟัง RANE HC6S Headphone Amp appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งเสียง HAL4 stand-alone 2-Input, 2-Output drag-and-drop DSP device for Halogen software. Inputs are Line / Line-Plus / Mic / Mic+48V capable

The HAL4 Programmable DSP Audio Distribution Multiprocessor from Rane allows you to easily create a network of audio and paging zones. It has 2100 MIPS of processing power, and includes its own Halogen control software for Windows, which assists in everything from dynamic signal routing to cable testing.

The HAL4 provides two on-board analog inputs and outputs in Euroblock format. Each input supports a dynamic mic, 48V phantom mic, +4 dBu line-level, or Rane’s line-plus input. The line-plus mode accepts -10 dB unbalanced left/right monoed together on the “+” and “-” ports respectively. Line-plus also connects the stereo RCA left tip to the “+” terminal, the RCA right tip to the “-” terminal, and both RCA shields to the Euroblock ground.

The HAL4 offers a single DR remote port, which can control parameters such as volume, DSP presets, input source, and system states. The unit may be connected to the DR1, DR2, DR3 or DR6. Additionally, a DR4 or DR5 may be added for other logic inputs and outputs. The remote connects via CAT 5e cable at lengths up to 1000 feet (300 m).

The Halogen software enables complete control of all components networked to the HAL4 from an Ethernet-connected Windows-based PC. It’s indispensable in designing, configuring, and dynamically controlling your HAL audio system. It splits your workflow into two sections, hardware and processing. The hardware workspace allows you to see all connected devices, specify them, and troubleshoot. The processing workspace is where all the virtual patching, DSP effects processing, preset design/recall, zone link, and room combination settings take place. The system can also support external control systems, such as AMX, Crestron, and Stardraw. The HAL4 ships with the Halogen software and a standard IEC power cable.

Features:

• 2 mic/line/line-plus inputs x 2 line outputs
• Configurable mic / line / line-plus inputs
• +4 dBu balanced, mic or line level
• +48V phantom available in mic mode
• -10 dBv unbalanced, left/right monoed
• Single Digital Remote (DR) port

The post RANE HAL4 Multiprocessor appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งเสียง HAL3s Multiprocessor which supports 6 input by 10 output audio with 2 input x 6 output balanced analog connections, and another 4 input x 4 outputs digitally RADs (remote digital devices)

The HAL3s from Rane is a Multiprocessor which supports 6 input by 10 output audio with 2 input x 6 output balanced analog connections, and another 4 input x 4 outputs digitally through RADs (remote digital devices). The two analog inputs are Line/Line-Plus/Mic/Mic + 48V phantom power. In addition to supporting balanced line and microphone inputs, this configuration allows a stereo pair connection to an input, converting to a single L+R mono signal.

Two DR (digital remote) ports provide support for preset recall, level control and select functions using a DR1, DR2, or DR3. If more logic inputs and outputs are needed for ports, switches or external indicators (DR4 or DR5) may be added. DRs can be operated from a RAD port, so up to four DRs can plug into a HAL3s when RADs aren’t needed.

Features:

• DSP contains 2400 MIPS of processing power
• Ethernet 1000BASE-T with Zeroconf service discovery protocol for easy set up
• 2 analog Mic / Line-Plus Inputs on Euroblock connectors
• 6 analog balanced line outputs on Euroblock connectors
• Front panel signal and overload indicators for all inputs and outputs
• Two RAD Ports, each Port 2 in x 2 out plus control channel
• Four Digital Remote Ports [DR can connect to RAD port]
• Four Logic Inputs on Mini-Euroblock 6-pin connectors

The post RANE HAL3s Multiprocessor appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งเสียง HAL2 Multiprocessor supports 18 in x 18 out audio, with 8 in x 8 out on balanced analog connections, another 8 in x 8 out through RADs, and 2 in x 2 out through AES3 digital audio

A HAL2 Multiprocessor supports 18 in x 18 out audio, with 8 in x 8 out on balanced analog connections, another 8 in x 8 out through RADs, and 2 in x 2 out through AES3 digital audio. The HAL2 applies the same versatile Halogen software interface to venues that don’t need extensive expansion found in the HAL1x. It includes the same abilities to quickly design room combinations, paging systems, distributed music, and automixers with Rane’s “no virtual wiring needed” approach, but in a smaller I/O configuration to meet smaller budgets.

Features:

• DSP contains 4800 MIPS of processing power
• Ethernet 1000BASE-T with Zeroconf service discovery protocol for easy set up
• 8 analog balanced mic / line inputs on Euroblock connectors (green area)
  • Mic inputs have switchable +48 V phantom power
• 8 analog balanced line outputs on Euroblock connectors (orange area)
• AES3 stereo input (purple area)
• AES3 stereo output (purple area)
• Front panel signal and overload indicators for all inputs and outputs
• Four RAD Ports, each Port 2 in x 2 out plus control channel (blue areas)
  • RJ-45 shielded CAT 5e connections up to 150 meters (500 feet)
• Eight Digital Remote Ports (brown and blue areas) [DR can connect to RAD Ports]
  • RJ-45 shielded CAT 5e connections up to 300 meters (1000 feet)
• Four IR Remote Ports for IR2 Wall Sensors (lower gray area)
  • RJ-45 shielded CAT 5e connections up to 300 meters (1000 feet)
• Two Relay Outputs on Mini-Euroblock 6-pin connectors (upper gray area)
  • COM, NC & NO, 2 A, 48 V 60 W max switching power
• Four Logic Inputs on Mini-Euroblock 6-pin connectors (upper gray area)
  • Internal passive pull-up
• Unit Size: 2U, 3.5″H x 19″W x 8.25″D (8.9 cm x 48.3 cm x 20.9 cm)
• Unit Weight: 7 lb (3.2 kg)

The post RANE HAL2 Multiprocessor appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งเสียง HAL1x Expandable Multiprocessor supports 16 in x 16 out audio, with 8 in x 8 out on balanced analog connections, and another 8 in x 8 out through RADs.

The HAL1x Programmable DSP Audio Distribution Multiprocessor from Rane allows you to easily create an extensive, far-reaching network of audio and paging zones. It has 9600 MIPS of processing power, and includes its own Halogen control software for Windows, which assists in everything from dynamic signal routing to cable testing.

The HAL1x has 8 on-board analog inputs and outputs, but it can serve as the brains to an audio network expanding up to 512 inputs and 512 outputs. In addition to its Euroblock analog connectors, HAL1x offers four Remote Audio Device (RAD) ports and an Expansion Bus with support for up to 32 EXP1x expansion units. Each EXP1x provides 8 RAD ports.

Rane’s Remote Audio Devices (RADs) contain inputs with built-in A/D conversion and outputs with built-in D/A conversion. They can be placed up to 592.1 feet (150 m) from HAL1x, sending 48kHz/24-bit digital audio back and forth over CAT 5e connections. RADs are available in over 20 different combinations of input/output connectors.

Rane’s DR-series wall-mount remote controls can toggle parameters from within each output zone, such as volume, DSP presets, input source, and system states. The HAL1x supports up to 12 DRs, but has dedicated inputs for 8. The remotes connect by CAT 5e cables at lengths up to 984.3 feet (300 m).

The Halogen software enables complete control of all components networked to the HAL1 from an Ethernet-connected Windows-based PC. It’s indispensable in designing, configuring, and dynamically controlling your HAL audio system. It splits your workflow into two sections, hardware and processing. The hardware workspace allows you to see all connected devices, specify them, and troubleshoot. The processing workspace is where all the virtual patching, DSP effects processing, preset design/recall, zone link, and room combination settings take place. The HAL1 can also support external control systems, such as AMX, Crestron, and Stardraw.

Features:

• Digitally Configured Audio Distribution
• Expandable Up to 512 Inputs & Outputs
• 9600 MIPS of Processing Power
• 8 Balanced Euroblock Mic/Line Inputs
• 8 Balanced Euroblock Outputs
• 4 Onboard RAD Ports
• Includes Halogen Control Software
• Supports External Control Systems
• Supports Rane DR-Series Remote Controls
• Multizone Paging

The post RANE HAL1x Expandable Multiprocessor appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งเสียง RANE EXP7x eight-channel high performance Acoustic Echo Cancellation (AEC) conferencing solution for the HAL1x

The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block. Chain up to 32 EXP7x units to a HAL1x for 256 assignable AEC channels.

Because EXP7x AEC channels are not associated with a particular hardware input, preset recall can re-assign an AEC resource across inputs / rooms as required. Drag and drop AEC supports the typical one-AEC-per-microphone configuration. With optimum acoustics, mic and loudspeaker placement, or with rarely used mics (such as audience mics) it allows mixing more than one mic into a single AEC channel, significantly reducing cost.

Need One Cable Through Multiple Conference Rooms with an AEC Mic Mixer Under Each Table? We’ve Got That.

Features:

• Eight-Channel Conference Room System
• Conference Room Combine Block
• Conference Switchboard DSP Router
• Automatic Gain Control
• Five-Band Parametric EQ with Cut Filters
• Ambient Noise Reduction
• Flexible Drag-and-Drop AEC Placement
• Comprehensive Metering

The post RANE EXP7x AEC Expander appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งเสียง RANE EXP5x 12 mic/line/line-plus Input & DSP Expander for the HAL1x. It supplies four DR (digital remote) ports,

The 1RU EXP5x from Rane is a 12 mic/line/line-plus Input & DSP Expander for the HAL1x. It supplies four DR (digital remote) ports, which are useful for adding source selection and/or volume control remote controls. Each of the 12 inputs independently supports either dynamic microphone, 48V phantom microphone, +4 dBu line-level, or Rane’s line-plus summing input. Line-plus accepts -10 dBV unbalanced left/right summed into mono together on the “+” and “-” ports, respectively. For stereo unbalanced sources, line-plus allows connecting the stereo RCA left tip conductor to the “+” terminal, the RCA right tip to the “-” terminal, and both RCA shields to the EXP5x Euroblock ground. Line-plus can be selected in Halogen to get a properly summed mono audio channel

Features:

• Adds 12 analog mic/line/line-plus inputs to a HAL1x
• Adds 4 digital remote ports to a HAL1x
• Chain up to 32 EXP5x units to a HAL1x for 384 analog outputs

The post RANE EXP5x Input Expander appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งเสียง RANE EXP3x 8-ch analog output & DSP expander for the HAL1x (required for operation). Two RAD ports make it a 4-input, 12-output audio device

The EXP3x is an 8-channel analog output & DSP expander for the HAL1x (required for operation). Two RAD ports make it a 4-input, 12-output audio device — depending on which two RADs are connected. Thus, 32 daisy-chained EXP3x Expanders provide 256 discrete zone outputs maximum, including output compression, parametric EQ, two levels of paging and background music. Also, eight logic outputs and six DR remote ports are included. Therefore, 32 daisy-chained EXP3x Expanders would provide 64 RAD ports, 192 DR ports and 256 logic outputs.

The dedicated DSP for each of the eight analog outputs offers two signal processing choices independently selectable per output. When you need background music, paging and emergency paging on an output, select the Zone Output processing set. This provides a Zone Processor block, and an Emergency Zone in addition to a Compressor and a 5-band parametric EQ with high- and low-cut filters. When Line Output is selected, the compressor and parametric EQ are available without the zone processing block and emergency paging blocks.

Features:

• For HAL1x Expansion
• Eight Channels of Analog Output
• DSP Available for Individual Outputs
• DSP: Compression and Parametric EQ
• Paging and Emergency Zone Paging
• Two Remote Audio Devices (RAD) Ports
• Daisy-Chain up to 32 EXP3x Expanders
• Supports Rane DR-Series Remote Controls
• Supports External Control Systems

The post RANE EXP3x Output Expander appeared first on soundspacethai.com.