Sale

เพาเวอร์มิกเซอร์ YAMAHA EMX5014C Power Mixer

เครื่องผสมสัญญาณเสียงแบบมีกำลังขยาย เพาเวอร์มิกเซอร์ YAMAHA EMX5014 C 10 channels, 14 inputs Powered Mixer with 1,000W Amp and Onboard Digital Effects

ราคาไม่รวมภาษีมูลค่าเพิ่ม

฿45,500.00 ฿36,400.00

สอบถามและสั่งซื้อสินค้า

Description

Yamaha EMX5014C  Audio Mixer with 500W Stereo Amplifier

เครื่องผสมสัญญาณเสียงแบบมีกำลังขยาย เพาเวอร์มิกเซอร์ YAMAHA EMX5014 C  10 channels, 14 inputs  Powered Mixer with 1,000W Amp and Onboard Digital Effects

The Yamaha EMX5014C Powered Mixer is the perfect band and club system. It has 10 channels, 14 inputs, and a host of features that add up to advanced mixing capability including selectable power: 500W, 200W, or 75W per channel.

The Yamaha mixer’s exclusive single-knob compressors on mono channels one thru six allow you to tame unruly vocals or tighten the bass. PFL switches allow you to monitor individual channels, and each channel has an on/off switch so you can instantly move channels in or out of the mix.

The Yamaha FCL (Feedback Channel Locating) system makes locating and eliminating feedback easier than ever. 80Hz high-pass filters eliminate low-end rumble. Yamaha Speaker Processing (YSP) provides optimized matching with speakers, for clean, solid reproduction that will deliver your music with maximum impact.

A 9-band graphic is assignable, and power can be configured as main + main, main + aux 1, or aux 1 + aux 2. Signal and peak indicators make monitoring easy, and another LED signals power amp overload and limiter activation. Onboard digital multi-effects with 16 programs. The Yamaha EMX5014 stereo mixer has it all, plus Yamaha sound quality.

Features:

  • Exclusive single-knob compressors on each input control unruly vocals or tighten up a bass guitar
  • Feedback channel locator LEDs on each input pinpoint problems for easy correction
  • 80Hz highpass filters for eliminating low-frequency noise and rumble
  • Channel ON switches let you switch individual channels into or out of the mix
  • PFL (Pre-Fader Listen) switches allow isolated monitoring of individual channels
  • All input channels feature signal and peak indicators for visual signal monitoring
  • Linear Aux 1, Aux 2, and Effect return faders with AFL (After-Fader Listen) monitor switches
  • Stereo master fader with both PFL and AFL monitor switches
  • has been activated due to power amplifier overload
  • Power amp mode selector allows 2-channel power amp to be quickly configured for Main + Main, Mono + Aux 1, or Aux 1 + Aux 2 operation
  • Power amplifier output selector allows selection of 500, 200, or 75-watt output per channel

Specifications

Outline EMX5014C
Mixing capability Mixing channels 6 Mono + 2 Stereo +Return
AUX 3 (incl. 1x Effect Send)
MAIN Stereo
Input channel functions CH1-6: HPF, Compressor, 3-band mid-sweep PEQ Insert I/O; CH7-10: HPF, 3 band PEQ; CH11-14: 3 band PEQ
On-board processors 2x SPX, 2x 9-band GEQ, YSProcessing
I/O Mic inputs 8
Phantom power +48V DC; ON/OFF
Line inputs 4x Stereo
Control and others Foot switch
On-board amplifiers Maximum output power @4ohms 500W/ch
Maximum output power @8ohms 370W/ch (100V model), 350W/ch (120V model), 320W/ch (220-240V model)
Output selection 500W, 200W, 75W; L/R, AUX1/MONO, AUX1/AUX2
General specifications EMX5014C
Total harmonic distortion Less than 0.3%
Frequency response 0, +0, -3dB 20Hz-20kHz
Hum & noise level Equivalent input noise -128dBu
Residual output noise -68dBu (Speaker out); -95dBu (Line out)
Crosstalk -68dB
Protection circuit Load protection Power switch on/off mute, DC-fault (power supply shutdown/manual reset), Clip limiter (≧THD 1%; compression)
Amplifier protection Thermal (heatsink temp ≧90 degrees celsius; output mute/auto reset), Vl limiter (RL ≦2ohms)
Power supply protection Thermal (heatsink temp ≧100 degrees celcius; power supply shutdown/manual reset)
Cooling 2x Variable-speed fan
Power requirements Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
Power consumption 500W
Dimensions W 444mm; 17-1/2in
H 155mm; 6-1/8in
D 493mm; 19-7/16 (12U)
Net weight 10.5kg; 23.2lbs
Accessories Owner’s Manual, AC power cord

Input characteristics

Input terminal PAD GAIN Actual load impedance For use with nominal Input level Connector
Sensitivity Nominal Max. before clip
CH INPUT A 1-6 0dB -60dB 3kohms 50-600 ohm Mics -80dBu -60dBu -40dBu XLR-3-31 type *3
-16dB -36dBu -16dBu +4dBu
26dB -34dB -54dBu -34dBu -14dBu
+10dB -10dBu +10dBu +30dBu
CH INPUT B 1-6 0dB -60dB 10kohms 600 ohm Lines -80dBu -60dBu -40dBu TRS phone jack
-16dB -36dBu -16dBu +4dBu
26dB -34dB -54dBu -34dBu -14dBu
+10dB -10dBu +10dBu +30dBu
ST CH INPUT
7/8-9/10
-60dB 3kohms 50-600 ohm Mics -80dBu -60dBu -40dBu XLR-3-31 type
-16dB -36dBu -16dBu -10dBu
-34dB 10kohms 600ohm Lines -54dBu -34dBu -14dBu Phone jack
+10dB -10dBu +10dBu +30dBu
ST CH INPUT
11/12-13/14
-34dB 10kohms 600ohm Lines -54dBu -34dBu -14dBu Phone jack,
RCA pin jack
+10dB -10dBu +10dBu +30dBu
CH INSERT IN (1-6) 10kohms 600ohm Lines -20dBu 0dBu +20dBu Phone jack

* 0dBu= 0.775Vrms

Output characteristics

Output terminal Actual source impedance For use with nominal Output level Connector
Nominal Max. before clip
ST OUT [L,R] 150ohms 600ohm Lines +4dBu +20dBu TRS phone jack
ST SUB OUT [L,R] 150ohms 600ohm Lines +4dBu +20dBu TRS phone jack
AUX SEND 1,2 150ohms 600ohm Lines +4dBu +20dBu TRS phone jack
EFFECT SEND 150ohms 600ohm Lines +4dBu +20dBu TRS phone jack
CH INSERT OUT 1-6 600ohms 10kohm Lines 0dBu +20dBu TRS phone jack
REC OUT [L,R] 600ohms 10kohm Lines -10dBV +10dBV RCA pin jack
PHONES [L,R] 100ohms 8ohm / 40ohm Lines 1mW/
3mW
20mW/
75mW
ST phone jack
SPEAKER OUT 0.1ohms 4ohm Speakers 125W 500W speakON
Phone jack


โทร. : 022031821, 026414744 ext 13, 020423530
สายด่วน : 081-2399040, 084-7696296, 089-6915832

Line : @soundspacethai

หรือส่งข้อความด้านล่างเพื่อติดต่อเราทาง Facebook