เพาเวอร์แอมป์ CERWIN-VEGA CV900 Power Amplifier

Name: เพาเวอร์แอมป์ CERWIN-VEGA CV900 Power Amplifier
Price: 12900.00 THB
Availability: InStock

เครื่องขยายเสียง เพาเวอร์แอมป์ Cerwin-Vega CV-900 2-channel, มีกำลังขับ 2x 210 วัตต์ที่ 8 โอหม์, 2x 320 วัตต์ที่ 4 โอหม์, 2x 420 วัตต์ที่ 2 โอหม์, parallel or bridged mono-operating modes for flexible application, Bridged Mono 8 โอหม์ 650 วัตต์, 4 โอหม์ 845 วัตต์

ราคาไม่รวมภาษีมูลค่าเพิ่ม…

฿12,900.00

สอบถามและสั่งซื้อสินค้า

Category: เพาเวอร์แอมป์ (Power AMP) Tag: CERWIN-VEGA

Description

Cerwin-Vega CV-900 High Performance Professional Power Amplifier

The Cerwin-Vega CV-900 High Performance Professional Power Amplifier is a rugged, 2U rack-mountable workhorse with the muscle to accommodate demanding audio challenges. With a power rating of 900W, support for bridged mono operation, and exceptional THD (Total Harmonic Distortion) and Signal-to-Noise ratings, this Power Amplifier from the CV Series is suitable for a wide range of musical tasks.

It features a highly efficient tunnel cooling system to ensure reliable and cool running operation, 21-position detent level control knobs for easily repeatable settings, signal and clip indicators for convenient monitoring of the amplifier’s status, and right connectors for integration into most environments.

Features:

Front panel LED displays indicate power, clip protect, and signal status
Balanced XLR and TRS input connectors for each channel and link ports
Speakon NL-4 locking output connectors and binding posts
Detented 21-position input level control knobs
Defeatable limiter and high pass filter per channel
Short circuit, thermal, current limit, DC offset, current inrus, RF protection, Turn On/ Turn Off muting protection
5-way output binding posts and Speakon output connectors for secure operation
Flow-through cooling design prevents overheating with continuously variable speed, front to rear
2-channel, parallel or bridged mono-operating modes for flexible application (900W)
Independent limiters for each channel reduce overload distortion
Independent input level controls for each channel allow precision adjustments
Precise signal and clip LED indicators to monitor performance, allow you to correct for overloading (clipping) condition
Low-frequency filters (40 Hz) remove rumble and subsonic frequencies
Twin-tunnel and 2 temperature-sensitivity forced-air cooling system to maintain a low operating temperature during use
5-way output binding posts or Speakon connectors enable secure operation
High-current toroidal transformer for absolute reliability
Independent DC and thermal overload protection on each channel automatically protects amplifier and speaker from damage or failure
Can be mounted in any standard 19″ rack

Specifications

Output
Rated Output Current	Stereo, Both Channel Driven:8 Ω: 210 W 4 Ω: 320 W 2 Ω: 420 W
Bridging Features	Bridged Mono:8 Ω: 650 W 4 Ω: 845 W
S/N Ratio	20 Hz to 20 kHz, 100 dB
Distortion	0.05% (SMPTE-IM)
Input Sensitivity @ 8 ohms	4 dBu
Voltage Gain	30 dB
Circuitry	Output Circuitry: AB
Current Consumption	Current Consumption: 120 VAC / 240 VAC@ 1/8 Power @ 4 Ω: 4.5 A / 2.2 A @ 1/3 Power @ 4 Ω: 7 A / 3.6 A @ Rated Power @ 4 Ω: 10.5 A / 5.5 A
Distortion	20 Hz to 20 kHz Half Power: 0.01% 1 kHz Rated Power: 0.1%
Frequency Response	0/-0.5 dB ; 20 Hz to 20 kHz, 0/-3 dB ; 5 Hz to 60 kHz
Damping Factor	200 (400 Hz)
Input Impedance	15 kΩ unbalanced, 30 kΩ balanced
Input Clipping Level	22 dBu (10 V RMS)
Cooling	Continuously variable speed, front to rear

Connectors
Input	Active balanced combo (XLR and ¼” TRS common use)
Output	5-way binding post and Speakon

Controls
Front	AC power switch, channel 1 and 2 volume
Rear	HPF switch, limiter switch, mode selector switch
Indicators	Active: Light blueProtection and Clip: Red Signal: Dark blue
Protection	Short circuit, thermal, current limit, DC offset, current inrush, RF protection, Turn On/ Off muting
Power Requirements	120 V 60 Hz
Dimensions (W x H x D)	19.00 x 3.50 x 16.50″ (48.26 x 8.89 x 41.91 cm)
Weight	28.00 lb (12.70 kg)