Radial StageBug SB-15 Tailbone Signal Buffer

อุปกรณ์บัฟเฟอร์สัญญาณ Radial StageBug SB-15, 100% Discrete Class-A Buffer, Drag Control Load Correction, Drives Pedals to 50′, Converts Two 9V Supplies to 15 VDC, Drag Control load correction adjusts the load on the pickup for a more natural sound and feel

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

฿3,700.00

สอบถามและสั่งซื้อสินค้า

Category: เอฟเฟ็คกีตาร์/เอฟเฟ็คเบส Tag: BLUSTREAM

Description

Radial StageBug SB-15 Tailbone Signal Buffer & 9V to 15V Converter

The Stagebug SB-15 is a class-A signal buffer designed to sit at the beginning of the signal chain and drive multiple pedals without added noise or signal loss. It also converts two 9V power outputs to a 15V supply as an alternative way to power Radial and Tonebone 15V products.

Features:

Hi-Z 1/4″ guitar input connects to a class-A buffer circuit
9 VDC In-1 provides power to the Tailbone class-A active buffer circuit
9 VDC In-2 is used with 9 VDC In-1 to increase input power so that the Tailbone can deliver 15V to a Tonebone pedal
Enclosure is made from 14-gauge steel to protect sensitive internal electronics while shielding against magnetic fields
1/4″ buffer output connects to pedals and amp, allowing longer cable run without noise (up to 50′)
15 VDC, 400mA output designed to supply Tonebone pedals using two 9 VDC supplies as the power source
Durable powder-coat finish
Double-sided, military-grade circuit board features through-hole solder points for extra durability, and full-surface ground plane to reduce susceptibility to noise
Stand-offs are made from steel and pressed into the outer casing to ensure proper retention of the circuit board
Connectors made from glass-filled nylon are insulated for reduced noise and feature nickel-silver contacts that will not tarnish
Dual potentiometer doubles up solder points for greater durability, and steel casing with steel shaft and retention nut does not bend when under stress
Drag Control load correction adjusts the load on the pickup for a more natural sound and feel

Specifications

Audio Circuit Type	Class-A FET buffer
Frequency Response	20 Hz to 30 kHz
Total Harmonic Distortion	0.01% @ 1 kHz
Dynamic Range	104 dB with dual 9 V supply 98 dB with single 9 V supply
Input Impedance	22 to 500 kOhms
Output Impedance	4.7 kOhms
Maximum Input	16 dBu
Gain	0 dB (unity gain)
Clipping Level	Output: 16 dBu
Noise Floor	-88 dBu
Intermodulation Distortion	0.004%
Phase Deviation	<5° at 20 Hz
Audio Connections	1/4″ unbalanced Hi-Z in / out
Controls	Drag control load correction circuit
Power Input	Dual 9 VDC, 200 mA for optimal performance
Power Input Connector	Standard 2.1 mm barrel with center negative (-)
Power Output Connector	Standard 2.1 mm barrel with center positive (+)
Power Output	15 VDC, 400 mA
Construction	Steel enclosure
Operating Conditions	For use in dry locations only between 41 to 104°F (5 to 40°C)
Dimensions	4.50 x 1.85 x 1.35″ (11.40 x 4.70 x 3.40 cm)
Weight	0.55 lb (0.25 kg)