ตู้ลำโพงซับเบส Martin Audio Blackline Q118 Passive Subwoofer 18″

ลำโพงซับเบส Martin Audio Blackline Q118 เป็นตู้แบบ Compact, direct-radiator subwoofer, ขนาดดอกลำโพง 18 นิ้ว long excursion voice coil, ferrite motor system, ทนกำลังขับ 800 วัตต์ AES, 3200 วัตต์ peak, 8Ω nominal impedance, Integral ergonomic handles

Coming Soon……

฿63,100.00

สอบถามและสั่งซื้อสินค้า

Category: ลำโพงแบบไม่มีกำลังขยายในตัว (Passive) Tag: MARTIN AUDIO

Description

Martin Audio Blackline Q118 Passive Subwoofer 18″ 800W

Blackline Q118 is a compact, high-performance subwoofer designed for use with Blackline Q Series full-range loudspeakers. It extends the system’s low-frequency response down to 38Hz and delivers exceptional impact, with a peak SPL of 130dB (136dB with crest factor 4)

Features:

Compact, direct-radiator subwoofer
1 x 18” (460mm) driver with 4” (102mm) voice coil
Peak SPL of 130dB (136dB with crest factor 4)
Durable plywood enclosure
Slot ports for reduced air noise
Perforated steel grille
M20 / 1.4” (35mm) pole-mount socket
8Ω nominal impedance
Integral ergonomic handles
Rebate recesses for stable vertical stacking
M10 flying inserts
Fittings for optional castors
Three NL4 connectors

Specifications

Type	Compact, high-performance 18″ subwoofer
Frequency response (4pi)	38 Hz – 100 Hz ± 3 dB, -10 db @ 31 Hz
Driver	18” (460 mm) with 4” (100 mm) long excursion voice coil, ferrite motor system
Rated power	800 W AES, 3200 W peak
Required electronics	Processor and amplifier, or a combined amplifier-processor unit
Recommended electronics	DX0.4, DX0.6 or DX4.0 system processor and VIA amplifier, or iKON amplifier-processor
Sensitivity	95 dB
Maximum SPL	124 dB continuous, 130 dB peak, 136 dB peak with crest factor 4
Nominal impedance	8 ohm
Dispersion	Omnidirectional
Crossover	Not applicable
Enclosure	Durable plywood
Finish	Black textured paint
Protective grille	Black perforated steel grille with scrim cloth backing
Connectors	3 x NL4 connectors: 2 at bottom rear (input and link A), 1 at top rear (link B)
Pin connections (input)	1+/1–
Pin connections (link A)	1+/1– to 1+/1– and 2+/2– to 2+/2–
Pin connections (link B)	1+/1– on input to 2+/2– on link B
Fittings	16 x M10 inserts: 3 on top, 3 on bottom, 3 on left, 3 on right, 4 on rear
	16 x M8 inserts on rear for optional castors
	2 x bar handles with recycled ABS pockets: 1 on each side
	M20 top-mounted thread plate for pole mounting
	4 x skids on base, 4 x recesses on top: for stacking vertically
Dimensions	(W) 530 mm x (H) 606 mm x (D) 690 mm
	(W) 20.9 in x (H) 23.9 in x (D) 27.2 in
Weight	45.5 kg (100.3 lbs)