Sale

เพาเวอร์แอมป์ QSC PLX1802 Power Amplifier

เครื่องขยายเสียงรบกวน QSC PLX1802 มีกำลังขับ 330 วัตต์ ที่ 8 โอมห์ Stereo (per channel) 900 วัตต์ @ 2 โอมห์ Stereo (per channel), XLR and 1/4″ Inputs, Protection Circuitry

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม…..

฿51,000.00 ฿40,800.00

สอบถามและสั่งซื้อสินค้า

Description

เครื่องขยายเสียงQSC PLX1802  330W 8 Ohms

เครื่องขยายเสียงรบกวน QSC PLX1802 มีกำลังขับ 330 วัตต์ ที่ 8 โอมห์ Stereo (per channel) 900 วัตต์ @ 2 โอมห์ Stereo (per channel), XLR and 1/4″ Inputs, Protection Circuitry

The QSC PLX-1802 is a rackmount stereo power amplifier, offering up 330W per channel at 8 Ohms, and weighing in at a mere 21 pounds. The unit is designed to drive up to 4 loudspeakers from each amplifier channel (2 Ohm loading), or when high power bridge mono operation is required, and offers a comprehensive feature set with uncompromised PLX performance and technology.

The PLX-1802 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status, and is a worthy solution for either high-quality portable P.A. amplification use, or in a studio situation as a reference playback alternative.

Features:

  • Lightweight, high-output stereo rackmount power amplifier with Stereo, Parallel and Bridged Mono operation and indicators
  • 21-position front-panel gain controls for precise, repeatable amplifier adjustment
  • Cooling design with front-exit hot air exhaust, Flow-through heat sinks require no filters, eliminating clogging
  • Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, stable into reactive or mismatched loads
  • Clip limiting protects speakers; thermal limiting maintains operation even during abnormal overload conditions
  • Front panel LED power, clip, -10dB, and signal present indicators for system monitoring and troubleshooting
  • Balanced XLR inputs with parallel TRS connectors and loop-through support
  • Speakon NL-4 output connectors with positive-locking speaker connection; Ch. 1 output uses all 4 wires for single-cable connection to bi-amplified speakers

Specifications

Power Rating Rating @ 1 kHz, THD=0.1%

575W @ 4 Ohms Stereo (per channel)

330W @ 8 Ohms Stereo (per channel)

900W @ 2 Ohms Stereo (per channel)

1200W @ 8 Ohms Bridged

1800W @ 4 Ohms Bridged

 

Rating @ 20Hz – 20kHz, THD=0.05%

525W @ 4 Ohms Stereo (per channel)

320W @ 8 Ohms Stereo (per channel)

1100W @ 8 Ohms Bridged

Damping Factor > 500
Input Sensitivity 1.28Vrms @ 8 Ohms
Input Impedance 20 kOhms, balanced

10 kOhms, unbalanced

Gain 32dB (@ 8 Ohms)
Frequency Response 20Hz – 20kHz, -0.5dB
Signal-to-Noise Ratio -107dB (20Hz – 20kHz)
Total Harmonic Distortion (THD) <0.02%, 20Hz – 20kHz
Input Connections 2 x XLR female, balanced

2 x 1/4″ TRS phone, balanced

Output Connectors 2 x NL-4 Speakon (both channels available on Ch.1 output)
Controls Front Panel 2 x detented rotary Input Attenuators

1 x Power switch

Controls (Rear) Bridge/Stereo/Parallel Input Configuration switch

Clip Limiter switch

2 x Top 100 Hz HPF/Full/Sub 100 Hz LPF

2 x 33 Hz HPF/Full Filters

Indicators 2 x Ch.1,2 red Clip LEDs

2 x Ch.1,2 green -10dB LEDs

2 x Ch.1,2 green -35dB signal LEDs

1 x blue Power LED

1 x amber Parallel LED

1 x amber Bridge Mono LED

Cooling 1 x variable-speed fan (back-to-front airflow)
Power Consumption 1/8 power (pink noise)

@8 Ohms: 5.0A/120V

@4 Ohms: 8.7A/120V

@2 Ohms: 13A/120V

1/3 power (pink noise)

@8 Ohms: 7.7A/120V

@4 Ohms: 12.3A/120V

@2 Ohms: 19.7A/120V

Full Power

@8 Ohms: 12.6A/120V

@4 Ohms: 21.3A/120V

@2 Ohms: 33.2A/120V

Power Requirements 100-120 or 220-240 VAC, 50-60Hz
Dimensions 19 x 3.5 x 14.9″ (483 x 89 x 379mm)
Weight 21 lbs (9.5kg)
Packaging Info
Package Weight 27.05 lb
Box Dimensions (LxWxH) 24.0 x 18.0 x 6.0″

โทร. : 022031821 , 026414744 ext 13
สายด่วน : 099-8759336, 081-2399040 (Eng), 089-6915832

Line : @soundspacethai

หรือส่งข้อความด้านล่างเพื่อติดต่อเราทาง Facebook