ไมโครโฟนสตูดิโอ audio technica AT2020 TYO Limited Edition Microphone
ไมโครโฟนสำหรับอัดเสียงรุ่นยอดนิยมจากแบรนด์ audio technica ได้ออกรุ่น AT2020 TYO Limited Edition สำหรับคุณลูกค้าพิเศษโดยเฉพาะโดยเป็นสีน้ำเงิน INDIGO BLUE โดยยังมีลักษณะเด่นและคุณสมบัติเหมือน AT2020 เดิมทุกประการ
ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม…..
฿3,400.00
Description
audio technica AT2020 TYO Limited Edition Microphone
ไมโครโฟนสำหรับอัดเสียงรุ่นยอดนิยมจากแบรนด์ audio technica ได้ออกรุ่น AT2020 TYO Limited Edition สำหรับคุณลูกค้าพิเศษโดยเฉพาะโดยเป็นสีน้ำเงิน INDIGO BLUE โดยยังมีลักษณะเด่นและคุณสมบัติเหมือน AT2020 เดิมทุกประการ
Side address microphone AT2020 that meets the strict quality and consistency standards of Audio-Technica. AT2020TYO is a limited quantity model based on AT2020 that uses indigo, which has been used since ancient times in Japan, as the main body color.
It offers a rugged body, high input resistance design, and wide dynamic range that enable the performance you want. The specially designed diaphragm provides a wide range of frequency characteristics and excellent transient response.
Features:
- Side address condenser microphone with excellent cost performance.
- Ideal for home recording / video distribution.
- Achieves a high input resistance design and a wide dynamic range that correspond to various scenes.
- A wide range of frequency characteristics and excellent transient response due to the specially designed diaphragm.
- Adopts unidirectional sound that suppresses side and rear sound collection and captures only the targeted sound.
- Comes with a dedicated stand mount that allows you to easily and accurately place the microphone.
Specifications
| Transducer | Fixed-charge back plate permanently polarized condenser |
| Polar Pattern | Cardioid |
| Form Factor | Stand/Boom Mount |
| Frequency Response | 20Hz – 20kHz |
| Sound Field | Mono |
| Open Circuit Sensitivity | -37 dB (14.1 mV) re 1V @ 1 Pa |
| Impedance | 100Ω |
| Noise | 20 dB SPL |
| Capsule | Condenser |
| Dynamic Range (Typical) | 124dB, 1 kHz @ Max SPL |
| Polar Pattern | Cardioid |
| Signal-to-Noise Ratio | 74dB, 1kHz @ 1 Pa |
| Maximum Input Sound Level | 144dB SPL, 1kHz @ Max SPL |
| Power Requirements | 48V DC, 2 mA typical |
| Orientation | Side Address |
| Circuitry | Solid-State |
| Output Impedance | 100 ohms |
| Output Connectors | 3-pin XLR male |
| Pad | None |
| Pad | No |
| High-Pass Filter | None |
| Low Frequency Roll-Off | No |
| Tone Adjustment | None |
| Dimensions | 6.38″ x 2.05″ (162 x 52mm) (Length x Diameter) |
| Weight | 12.1 oz (345 g) |
| Indicators | None |
| On-Board Controls | None |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 144 dB SPL |
| Impedance | 100 Ohms |
| Sensitivity | 14.1 mV/Pa |
| Dynamic Range | 124 dB |
| Signal-to-Noise Ratio | 74 dB |
| Equivalent Noise Level | 20 dB |
| THD | 1% |
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| Operating Voltage | 48 V (Phantom Power) |
| Operating Current Consumption | 2.0 mA |
| Color | Black |
| Mounting | 5/8″-27 Female, Mic Clip (with Included Hardware) 3/8″-16 Female (via Integrated Hardware) |
| Dimensions | ø: 2.05 x L: 6.38″ / ø: 52 x L: 162 mm |
| Weight | 12.17 oz / 345 g |
Related Products
