Radial SW8-USB Dual-USB Auto-Switcher and Interface

ออโต้สวิตช์และอินเตอร์เฟส Radial SW8-USB, Dual USB Interface and Auto-switcher with 24-bit/192kHz Converters, 8 Balanced Analog Outputs on 1/4″ TRS, Synchronize both playback systems using MTC, All-in-one backing track solution, Exclusively for MacOS

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

฿87,900.00

สอบถามและสั่งซื้อสินค้า

Tag: Radial

Description

Radial SW8-USB Dual-USB Auto-Switcher and Interface

The SW8-USB is the complete solution for performances that utilize redundant playback systems for backing tracks, combining two built-in high performance USB interfaces with an auto-switching feature that detects dropouts and effortlessly switches to the backup computer in an instant.

Dual USB inputs with separate 24bit/192kHz converters allow two computers to be connected in tandem, so digital workstations on both machines can connect to the SW8-USB as an audio and MIDI interface.

Start/stop synchronization is also possible between both computers through MTC, ensuring flawless switching between playback rigs with less equipment than ever.

Features:

Easily switch between redundant playback systems
2 USB ports with 24-bit/192kHz converters eliminate the need for additional audio interface
8 channels of high-quality audio
Manual or seamless automatic switching
Line-level and transformer-isolated mic level outputs
Synchronize both playback systems using MTC
All-in-one backing track solution
Exclusively for MacOS

Specifications

Transformer:	Eclipse ET-DB2
Frequency response:	20hz-20Khz (+0.0dB/-0.5dB)
Dynamic range:	(XLR Outputs) 120dB (Monitor Outputs) 120dB
Total harmonic distortion:	(XLR Line Level Outputs) 0.006% @ 1Khz +18dBu (XLR Mic Level Outputs) 0.009% @ 1Khz +18dBu (Monitor Outputs) 0.006% @ +18dBu
Intermodulation Distortion:	(XLR Outputs) 0.0002% @ +18dBu (Monitor Outputs) 0.0002% @ +18dBu
Output Impedance:	(XLR Outputs) 150 Ohms (Monitor Outputs) 150 Ohms
Common Mode Rejection Ratio:	(XLR Line Level Outputs) -98dB (XLR Mic Level Outputs) -90dB (Monitor Outputs) -98dB
Noise:	(XLR Outputs) -120dB (Monitor Outputs) -120dB
Switch-Over Noise:	-90dBu
Sample Rate	44.1, 48, 88.2, 96, 176.4, 192
Supported Sample Rates:	44.1, 48, 88.2, 96, 176.4, 192
Bit Depth:	16bit, 24bit
D/A Latency:	7.4ms @ 96kHz, 4.6ms @ 192kHz
Switch-Over Latency:	3ms (when using Tone via SPDIF)
Maximum Output:	(XLR Outputs) +18dBu @ 0DBFS (Monitor Outputs) +18dBu @ 0DBFS
Features
Ground lift, Remote Footswitch
Input Connectors:	2 x Type-B USB 2.0
Output Connectors:	XLR-F, TRS, DB25
Extras:	MIDI I/O, Dual Power Supply, Remote Footswitch (optional)
General
Size (L x W x D):	17.5″x 6″x 1.75″ (44.5 cm x 15.25 cm x 4.5 cm)
Weight:	9.2lb (4.2kg)
Shipping size (L x W x D):	22″x10.375″x4.5″ (55.9cm x 26.4cm x 11.4cm)
Shipping weight:	9.7lb(4.4kg)
Power:	100V to 240V, locking 4-pin XLR
Conditions:	For use in dry locations only between 5°C and 40°C