ไดเร็คบ๊อกซ์ Radial PZ-Di Direct สำหรับสำหรับวงออเคสตร้า Box with Optimized for Orchestral Instruments with Adjustable Load, Variable High-pass Filter, Polarity Reverse, and Low-pass Filter, 48V phantom powered, does not require batteries
ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
฿10,000.00
ไดเร็คบ๊อกซ์ Radial PZ-Di Direct สำหรับสำหรับวงออเคสตร้า Box with Optimized for Orchestral Instruments with Adjustable Load, Variable High-pass Filter, Polarity Reverse, and Low-pass Filter, 48V phantom powered, does not require batteries
The PZ-Di has a variable load selector switch that allows you to set the input impedance of the direct box, so you can optimize the performance with your instrument’s pickups.
The 1 meg ohm position delivers the classic impedance found on most active DI boxes, while the 220k ohm setting warms up the tone of magnetic pickups to provide the feel and tone as if your instrument were connected directly to an amplifier.
The third setting is an ultra-high 10 meg ohm impedance that is specifically designed for piezo transducers, helping compensate for the harsh or squawky tone that can occur when a piezo is connected to a lower impedance input.
Item Type |
Standard DI
|
Number of Channels |
Single-Channel
|
Active/Passive |
Active
|
Circuitry |
Solid-State (FET)
|
Pad |
-15 dB
|
Ground Lift |
Yes
|
Polarity Reverse |
Yes
|
Low-Cut/High-Pass Filter |
Yes
|
Audio I/O |
1x 1/4″ TS Unbalanced Input
1x 1/4″ TS Unbalanced Thru 1x XLR 3-Pin Balanced Output |
Frequency Response |
20 Hz to 20 kHz
|
Input Impedance |
10 Megohm to 220 Kilohms (Unbalanced)
50 Kilohms (Pad On) |
Output Impedance |
200 Ohms
|
Total Harmonic Distortion/Noise |
0.02%
|
Operating Voltage |
48 V (Phantom Power)
|
Dimensions |
4.25 x 2.75 x 1.75″ / 107.95 x 69.85 x 44.45 mm
|
Weight |
19.2 oz / 544.31 g
|
Package Weight |
1.75 lb
|
Box Dimensions (LxWxH) |
6.4 x 4.2 x 2.9″
|