อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX RADIUS NX 12×8 Audio connections include 128 (64×64) channels of redundant Dante, 12 analog mic/line inputs, 8 analog outputs, and USB audio. Support for Radius and Edge Expansion Cards

Radius NX 12×8 is best suited for applications requiring a greater compliment of analog input and output channels and or logic output and external control input capabilities. Audio connections include 128 (64×64) channels of redundant Dante, 12 analog mic/line inputs, 8 analog outputs, and USB audio.

Features:

• Audio connections include 128 (64×64) channels of redundant Dante
• 12 analog mic/line inputs, 8 analog outputs
• 8×8 channels of USB audio
• Ultra-low noise preamps with 3 dB gain steps.
• USB audio port enables soft-codecs + record/playback.
• Dedicated routing resources for a 128×128 Super Matrix.
• 4-port Gigabit Switch serves Dante + control networks
• Support for Radius and Edge Expansion Cards

The post Digital Signal Processor SYMETRIX RADIUS NX 12×8 appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX RADIUS NX 4×4 Audio connections include 128 (64×64) channels of redundant Dante, 4 analog mic/line inputs, 4 analog outputs, and up to 8×8 channels of USB audio, Support for Radius and Edge Expansion Cards

SYMETRIX Radius NX 4×4 is an excellent choice in cost-sensitive applications where many Dante network audio endpoints are routed to a primary DSP and fewer analog connections are required. Audio connections include 128 (64×64) channels of redundant Dante, 4 analog mic/line inputs, 4 analog outputs, and up to 8×8 channels of USB audio.

Features:

• Audio connections include 128 (64×64) channels of redundant Dante
• 4 analog mic/line inputs, 4 analog outputs
• 8×8 channels of USB audio
• Ultra-low noise preamps with 3 dB gain steps.
• USB audio port enables soft-codecs + record/playback.
• Dedicated routing resources for a 128×128 Super Matrix.
• Support for Radius and Edge Expansion Cards

The post Digital Signal Processor SYMETRIX RADIUS NX 4×4 appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX RADIUS A Powerful General Purpose DSP / A Version with AEC, 12X8 EX 128 Channel (64×64) Redundant Dante, On-board Ethernet and Dante Network Switches, 1 I/O Expansion Card Slot, 12 Analog Inputs / 8 Analog Outputs

The Radius 12×8 EX featuring a configurable input/output option card slot, is a universal DSP building block with a 64×64 Dante™ network audio port,12 analog mic/line inputs, and 8 analog outputs.

The addition of the versatile option card slot reduces total system costs by maximizing the number of inputs or outputs in a single 1U DSP. For example, adding a Symetrix 4 Channel Analog Input Card creates a 16×8 analog configuration; with a 4 Channel Analog Output Card the result is 12×12.

The expansion slot supports an array of Symetrix audio I/O cards including 4-channel analog, 4-channel digital, 4-channel AEC, 2 line analog telephone, 2 line VoiP, and USB audio

Features:

• A Powerful General Purpose DSP / A Version with AEC
• 128 Channel (64×64) Redundant Dante
• On-board Ethernet and Dante Network Switches
• 1 I/O Expansion Card Slot
• 12 Analog Inputs / 8 Analog Outputs

The post Digital Signal Processor SYMETRIX RADIUS 12X8 EX appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX SOLUS NX 16×8  16-in, 8-out จอ OLED สําหรับแสดงผลหน้าเครื่อง พร้อมกับ GPIO สําหรับการควบคุมและซอฟท์แวร์ Composer Remote Control Manager, DSP Processing Identical to Radius / Edge / Prism, Delay Memory Identical

SYMETRIX SOLUS NX Designed to serve in standalone DSP applications, those not requiring Dante network audio, the Solus NX series features the same DSP power and delay memory as Symetrix’ Radius, Prism, and Edge DSPs.

Solus NX is ideally suited for a large range of installed sound applications, delivering DSP-intensive processing, routing and delay in systems requiring sophisticated loudspeaker management, auto-mixing, paging, routing and distribution, mic/line processing, AGC, room combining and more.

Features:

• Standalone DSP Price / Performance Breakthrough
• DSP Processing Identical to Radius / Edge / Prism
• Delay Memory Identical Radius / Edge / Prism
• Serves in Applications Not Requiring Dante™

Three audio input/output options

a front panel high-resolution graphic OLED for display of system status and audio levels. A single push-button is used to navigate menus.

Powerful, efficient DSP configured using award winning Composer CAD design software

**Route, process, and control audio in nearly unlimited ways serving countless applications. Eliminating the need for multiple software applications, all Symetrix open-architecture DSPs are programmed using Composer. Learn more Symetrix Composer Here

Multiple end user control options.

Solus NX DSPs can be controlled from Symetrix ARC wall panels including the universal mount ARC-3, the virtual ARC-WEB, Symvue a custom Windows® runtime control interface, third-party Ethernet equipped touch panels, or a combination of any or all of the above.

Transparency

An embedded web server displays analog I/O levels, diagnostics, and hosts the ARC-WEB control interface. The server is accessible from any networked smart phone, tablet, or computer by simply entering into the browser’s address field Solus NX’ local LAN or publicly accessible IP address, or its fully qualified domain name.

The post Digital Signal Processor SYMETRIX SOLUS NX 16×8 appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX SOLUS NX 8×8  8 in, 8 out จอ OLED สําหรับแสดงผลหน้าเครื่อง พร้อมกับ GPIO สําหรับการควบคุมและซอฟท์แวร์ Composer Remote Control Manager, DSP Processing Identical to Radius / Edge / Prism, Delay Memory Identical

SYMETRIX SOLUS NX Designed to serve in standalone DSP applications, those not requiring Dante network audio, the Solus NX series features the same DSP power and delay memory as Symetrix’ Radius, Prism, and Edge DSPs.

Solus NX is ideally suited for a large range of installed sound applications, delivering DSP-intensive processing, routing and delay in systems requiring sophisticated loudspeaker management, auto-mixing, paging, routing and distribution, mic/line processing, AGC, room combining and more.

Features:

• Standalone DSP Price / Performance Breakthrough
• DSP Processing Identical to Radius / Edge / Prism
• Delay Memory Identical Radius / Edge / Prism
• Serves in Applications Not Requiring Dante™

Three audio input/output options

a front panel high-resolution graphic OLED for display of system status and audio levels. A single push-button is used to navigate menus.

Powerful, efficient DSP configured using award winning Composer CAD design software.

**Route, process, and control audio in nearly unlimited ways serving countless applications. Eliminating the need for multiple software applications, all Symetrix open-architecture DSPs are programmed using Composer. Learn more Symetrix Composer Here

Multiple end user control options.

Solus NX DSPs can be controlled from Symetrix ARC wall panels including the universal mount ARC-3, the virtual ARC-WEB, Symvue a custom Windows® runtime control interface, third-party Ethernet equipped touch panels, or a combination of any or all of the above.

Transparency.  

An embedded web server displays analog I/O levels, diagnostics, and hosts the ARC-WEB control interface. The server is accessible from any networked smart phone, tablet, or computer by simply entering into the browser’s address field Solus NX’ local LAN or publicly accessible IP address, or its fully qualified domain name.

The post Digital Signal Processor SYMETRIX SOLUS NX 8×8 appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX SOLUS NX 4×4  4 in, 4 out จอ OLED สําหรับแสดงผลหน้าเครื่อง พร้อมกับ GPIO สําหรับการควบคุมและซอฟท์แวร์ Composer Remote Control Manager, DSP Processing Identical to Radius / Edge / Prism, Delay Memory Identical

SYMETRIX SOLUS NX Designed to serve in standalone DSP applications, those not requiring Dante network audio, the Solus NX series features the same DSP power and delay memory as Symetrix’ Radius, Prism, and Edge DSPs.

Solus NX is ideally suited for a large range of installed sound applications, delivering DSP-intensive processing, routing and delay in systems requiring sophisticated loudspeaker management, auto-mixing, paging, routing and distribution, mic/line processing, AGC, room combining and more.

Features:

• Standalone DSP Price / Performance Breakthrough
• DSP Processing Identical to Radius / Edge / Prism
• Delay Memory Identical Radius / Edge / Prism
• Serves in Applications Not Requiring Dante™

Three audio input/output options

a front panel high-resolution graphic OLED for display of system status and audio levels. A single push-button is used to navigate menus.

Powerful, efficient DSP configured using award winning Composer CAD design software.

**Route, process, and control audio in nearly unlimited ways serving countless applications. Eliminating the need for multiple software applications, all Symetrix open-architecture DSPs are programmed using Composer. Learn more Symetrix Composer Here

Multiple end user control options.

Solus NX DSPs can be controlled from Symetrix ARC wall panels including the universal mount ARC-3, the virtual ARC-WEB, Symvue a custom Windows® runtime control interface, third-party Ethernet equipped touch panels, or a combination of any or all of the above.

Transparency.  

An embedded web server displays analog I/O levels, diagnostics, and hosts the ARC-WEB control interface. The server is accessible from any networked smart phone, tablet, or computer by simply entering into the browser’s address field Solus NX’ local LAN or publicly accessible IP address, or its fully qualified domain name.

The post Digital Signal Processor SYMETRIX SOLUS NX 4×4 appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX Prism 16×16 16-analog in and out, 128 Channel (64×64) Dante, OLED displays configuration and audio level, Delay Memory Identical to Radius / Edge / Solus NX, DSP Processing Identical to Radius / Edge / Solus NX

The Prism family is the latest addition to the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media  networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism  is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for  future expansion.

Features:

• 16 analog in and out, 64×64 Dante and powerful Symetrix DSP reduce overall system costs.
• Ultra low latency Dante network audio protocol uses standard IT infrastructure.
• Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
• Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web server enables remote metering and diagnostics.
• High-resolution graphic OLED displays configuration and audio levels.

The post Digital Signal Processor SYMETRIX Prism 16×16 appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX Prism 12×12 12-analog in and out, 128 Channel (64×64) Dante, OLED displays configuration and audio level, Delay Memory Identical to Radius / Edge / Solus NX, DSP Processing Identical to Radius / Edge / Solus NX

The Prism family is the latest addition to the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media  networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism  is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for  future expansion.

Features:

• 12 analog in and out, 64×64 Dante and powerful Symetrix DSP reduce overall system costs.
• Ultra low latency Dante network audio protocol uses standard IT infrastructure.
• Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
• Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web server enables remote metering and diagnostics.
• High-resolution graphic OLED displays configuration and audio levels.

The post Digital Signal Processor SYMETRIX Prism 12×12 appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX Prism 4×4, OLED displays configuration and audio level, 4-analog in and out, Industry leading analog and A/D/D/A performance, 48 volt phantom, 64×64 Dante and powerful Symetrix DSP reduce overall system costs

The Prism family is the latest addition to the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media  networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism  is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for  future expansion.

Features:

• 4 analog in and out, 64×64 Dante and powerful Symetrix DSP reduce overall system costs.
• Ultra low latency Dante network audio protocol uses standard IT infrastructure.
• Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
• Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web server enables remote metering and diagnostics.
• Compact ½ rack format. PoE+ injector included. Rack and surface mount kits sold separately.
• High-resolution graphic OLED displays configuration and audio level

The post Digital Signal Processor SYMETRIX Prism 4×4 appeared first on soundspacethai.com.

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX Prism 8×8 8 analog in and out, OLED displays configuration and audio level,Industry leading analog and A/D/D/A performance, 64×64 Dante and powerful Symetrix DSP reduce overall system costs, 48 volt phantom

The Prism family is the latest addition to the Symetrix line of Dante™ enabled DSPs. Symetrix uses Dante, a multi-channel digital media  networking technology, to interconnect multiple Symetrix DSPs, Symetrix I/O expanders, and select third-party Dante enabled devices. Prism  is ideally suited for applications requiring powerful, extremely cost effective advanced signal processing coupled with a standardized means for  future expansion.

Features:

• 8 analog in and out, 64×64 Dante and powerful Symetrix DSP reduce overall system costs.
• Ultra low latency Dante network audio protocol uses standard IT infrastructure.
• Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
• Configured using award winning Composer software. Controlled from ARC wall panels, ARC-WEB and third-party touchscreens. Embedded web server enables remote metering and diagnostics.
• High-resolution graphic OLED displays configuration and audio levels.

The post Digital Signal Processor SYMETRIX Prism 8×8 appeared first on soundspacethai.com.