กล่อง DI ไดเร็คบ๊อก KLARK TEKNIK DI 22P 2-channel Passive Stereo Direct Box with Midas Transformer and Extended Dynamic Range, Stereo input on 1/4″, 1/8″ TRS and RCA connectors, Switchable input attenuation for guitar, line and speaker levels

Connect stereo high-impedance instruments, line sources, and even speaker signals to your mixer’s balanced XLR inputs with the DI 22P Passive Stereo DI Box from Klark Teknik.

This versatile unit features one 3.5mm stereo input along with dual 1/4″ and RCA input options and a pair of balanced Neutrik XLR outputs. The high-headroom design features Midas transformers for outstanding signal integrity.

Features:

• Passive Stereo DI Box for general purpose and multimedia applications
• Custom-built Midas transformers for highest signal integrity
• High headroom design offers superior sound quality
• Passive design does not require any power supply
• Stereo input on 1/4″, 1/8″ TRS and RCA connectors
• Switchable input attenuation for guitar, line and speaker levels
• Industry standard XLR connectors for highest reliability
• Earth Lift switches for input and output eliminate ground loop problems
• Fully transformer-isolated design ensures electrical separation
• Ultra-low noise and ultra-linear system for highest signal integrity
• Aluminium extrusion casing with protective rubber corners
• Compact and rugged design

The post ไดเร็คบ๊อก Di Box KLARK TEKNIK DI 22P 2-channel Passive Direct Box appeared first on soundspacethai.com.

ไดเร็คบ๊อกซ์ Radial PZ-Di Direct สำหรับสำหรับวงออเคสตร้า Box with Optimized for Orchestral Instruments with Adjustable Load, Variable High-pass Filter, Polarity Reverse, and Low-pass Filter, 48V phantom powered, does not require batteries

The PZ-Di has a variable load selector switch that allows you to set the input impedance of the direct box, so you can optimize the performance with your instrument’s pickups.

The 1 meg ohm position delivers the classic impedance found on most active DI boxes, while the 220k ohm setting warms up the tone of magnetic pickups to provide the feel and tone as if your instrument were connected directly to an amplifier.

The third setting is an ultra-high 10 meg ohm impedance that is specifically designed for piezo transducers, helping compensate for the harsh or squawky tone that can occur when a piezo is connected to a lower impedance input.

Features:

• Optimized for orchestral instruments on a live stag
• Adjustable load for piezo and magnetic pickups
• Variable highpass filter to control bass resonance
• Lowpass filter gently warms the top end of active instruments
• 48V phantom powered, does not require batteries

The post ไดเร็คบ๊อกซ์ Radial PZ-Di Orchestral Instrument DI appeared first on soundspacethai.com.

ไดเร็คบ๊อกซ์ Radial JPC สำหรับคอมพิวเตอร์ Laptop, Active, stereo DI for computer sound cards and other A/V applications, Eliminates Hum and Buzz common to PCs, Multiple connector types for any audio source, 48V Phantom Powered

The JPC is a stereo direct box that is easy to use with practically any consumer electronic device. It utilizes active buffers and transformer isolation to create a hybrid circuit that blocks ground loops and reduces system noise, along with AC blocking capacitors to prevent any audio system noise from bleeding back into the computer.

The choice of ¼”, RCA and 3.5mm input connectors make it easy to interface with all types of unbalanced audio sources such as computers, smartphones, and tablets, and the outputs are XLR balanced mic level to feed snake systems and PAs.

Powering the JPC is accomplished via 48V phantom from a mixing console, allowing the JPC to be used in concert environments without requiring an external power supply.

Features:

• Stereo DI for computer sound cards & A/V.
• Transformer isolation eliminates ground loops.
• Converts -10db to balanced XLR mic level.
• Active drive circuit for long cable runs.
• Compact design – may be J-Rak mounted.
• 48V phantom power eliminates batteries.
• Ultra rugged 14-gauge steel construction.

The post ไดเร็คบ๊อกซ์ Radial JPC Active Direct Box for Laptop Computers appeared first on soundspacethai.com.

ไดเร็กบ็อกซ์ Rupert Neve Designs RNDI-M Active mono DI box, Same Circuitry as RNDI, RNDI-S, RNDI-8, Class-A Biased Discrete FET Amplifiers, Re-Amping of Pro Line-Level Sources, Powered by +48V Phantom Power, For Guitar, Bass, Synth, Keys, and more

Rupert Neve Designs RNDI-M, a compact, active transformer Direct Interface (DI) that features the same circuitry as the award-winning RNDI, RNDI-S and RNDI-8, but in a compact and pedal-board friendly format. By streamlining.

Its feature set and housing the electronics in a rugged and more compact chassis, the RNDI-M fits neatly into any space and will allow even more musicians and engineers to tap into the uncompromised sonic power and vibrancy of a Rupert Neve Designs DI.

The RNDI-M provides instrument direct injection for electric guitars and basses, synthesizers, keyboards, piezo pickups, or any other instrument-level source.

The discrete, Class-A circuit topology is built around Mr. Rupert Neve’s custom transformers, resulting in outstanding sonic performance and strikingly natural sound from below 5 Hz all the way up to well beyond 90 kHz.

It can handle input levels up to +20.5 dBu, the low impedance, transformer-coupled output stage drives long lines with minimal loss, and the rugged steel chassis is designed for a lifetime of stage and studio use.

Features:

• Ultracompact and Streamlined
• Same Circuitry as RNDI, RNDI-S, RNDI-8
• Class-A Biased Discrete FET Amplifiers
• Low-Impedance, Transformer-Balanced Out
• “Re-Amping” of Pro Line-Level Sources
• Powered by +48V Phantom Power
• Rugged Powder Coated Steel Chassis
• Minimal Loss of HF over Long Distances
• Adds 2nd and 3rd Order Harmonics

The post ไดเร็คบ๊อกซ์ RUPERT NEVE DESIGNS RNDI-M Active Di Box appeared first on soundspacethai.com.

ไดเร็คบ็อกและอุปกรณ์ป้องกันไฟย้อนแบบสเตอริโอ Radial Highline Stereo Passive Line Isolator, Connect Guitar and Amp Modelers to Mixer, 2-Channel Isolator with Stereo Thru Outs, Compact and Pedalboard-Friendly Design, No Loss of Signal Strength or Tone

The Radial Highline Stereo is a two-channel passive line isolator designed to seamlessly connect guitar and amp modelers to a PA system or recording interface. Featuring premium Jensen transformers, it ensures exceptional audio performance by maintaining signal integrity, eliminating ground loop noise, and preventing unwanted interference from phantom power.

Modern amp and cab simulators offer a wide range of tones but often use unbalanced 1/4″ outputs, making them susceptible to noise, signal degradation, and interference when connected directly to a mixer.

The Highline Stereo solves these issues by converting unbalanced signals to balanced outputs, allowing for long cable runs without signal loss and consistent, high-quality sound at any venue or studio session.

Built for professional touring and recording, the Highline Stereo features a rugged steel chassis, premium connectors, and industry-leading isolation to deliver clean, noise-free performance every time. Whether on stage or in the studio, this line isolator provides full signal integrity with minimal phase shift, distortion, or coloration, ensuring your tone stays true.

Features:

• Dual-channel passive line isolator for guitar and amp modelers
• Jensen 1:1 transformers for transparent signal conversion and noise elimination
• Converts unbalanced 1/4″ signals to balanced XLR outputs
• Galvanic isolation eliminates ground loop hum and interference
• Phantom power blocking prevents damage to pedalboards and modelers
• Durable steel construction for touring reliability
• Optimized gain staging for consistent, high-quality output

The post Radial Highline Stereo Passive Line Isolator appeared first on soundspacethai.com.

ไดเร็คบ็อกและอุปกรณ์ป้องกันไฟย้อน Radial Highline Passive mono Line Isolator, 1:1 Transformers, Sum Switch, and Ground Lift, Connect Guitar and Amp Modelers to Mixer, Compact and Pedalboard Friendly Design, No Loss of Signal Strength or Tone

The Radial Engineering Highline is a passive line isolator designed for guitarists and bassists using amp and cabinet modelers in live and studio settings. Featuring a Jensen 1:1 transformer, the Highline maintains signal integrity, eliminates ground loop noise, and provides a balanced output for seamless connection to a PA or recording system.

Designed for modern instrumentalists, the Highline ensures that long cable runs do not degrade tone, while also blocking phantom power to protect sensitive pedalboard equipment.

The Sum switch allows stereo inputs to be summed to mono, offering flexibility for various signal routing needs. Housed in a rugged steel chassis, the Highline is built for reliable performance in demanding touring environments.

Features:

• Premium Jensen transformer: provides galvanic isolation and eliminates ground loop noise
• Balanced XLR output: allows for long cable runs without signal loss
• Phantom power blocking: prevents 48V from reaching your pedalboard
• Stereo-to-mono summing: combines stereo inputs when needed
• Optimized for amp modelers: retains full volume and tone integrity when connecting to a PA
• Rugged steel construction: built to withstand live touring and studio use

The post Radial Highline Passive mono Line Isolator appeared first on soundspacethai.com.

Newton Channel Strip Rupert Neve Designs 5034 Mono Channel Strip with Class A Mic/Line Preamp, 3-band EQ, Compressor, Silk Harmonic Enhancement, Custom Transformer Outputs, and 8-segment LED Meters, For Recording and Mixing Applications

Rupert Neve Designs Newton Channel is an intuitive, high-quality channel strip that provides engineers, producers, and artists with modern functionality and classic sound on demand for a wide variety of recording and mixing applications.

The Newton Channel features a classic Rupert Neve mic pre, custom transformers, and Class-A line amplifiers for a huge headroom and punchy, larger-than-life sound.

The discrete 3-band EQ section with fully sweepable mid-band provides flexible and musical controls to quickly sculpt your sound. The discrete compressor section features a fast and smooth VCA circuit to gently tame transients or apply heavy compression.

Silk Red and Blue Saturation lets you dial in subtle richness or over-the-top vintage-style harmonic saturation using a simple set of controls. Other features include 31-position detented control knobs to accurately recall and match your settings with speed and precision.

A Stereo Link Switch allows you to link the gain reduction of two Newton compressors for powerful stereo-bus processing. Located in the unit’s 1 RU rack-mountable chassis is a universal power supply with IEC connection for worldwide AC power from 100-240 VAC.

Features:

• Sumptuous Rupert Neve sound; superlative specs across the board
• Frequency response: <10Hz–30kHz (+/-0.1dB); <5Hz–70kHz (+/-0.25dB); <5Hz–140kHz (-3dB)
• Input: Balanced XLR/TRS combo jack input (may be used for mic or line signals)
• 48V phantom power: Push-button switch illuminates RED when engaged
• Class A mic preamp; Gain: 72dB, including 6dB of fine trim control
• Ø (Polarity): Push-button switch illuminates amber when engaged
• Trim: 31-detent potentiometer allows adjustment of preamp gain within a range of +/-6dB
• HPF: Push-button switch illuminates green when highpass filter (adjustable from 20Hz–250Hz) is engaged
• EQ section: 3-band, +/-12dB, with LF and HF shelves (2 selectable frequencies each) and midband peaking (31 selectable frequencies)
• Compressor with threshold, release, make-up gain, and pre/post EQ switch
• Variable Silk harmonic enhancement with Red and Blue modes and 31-step Texture (amount) control
• 8-segment LED meters indicate compressor gain reduction (dB) and output level (dBu)
• Custom transformer outputs: Balanced XLR main line-level output; separate -6dBu XLR output
• Ground Lift: helps isolate unit from ground interference (operable on both outputs)
• Link: 1/4-inch TRS jack for linking 2 Newton Channel compressors stereo operation
• Internal universal power supply provides reliable 90–240V power worldwide
• IEC AC power inlet with integrated power switch
• Robust 1U rackmount chassis
• Handcrafted by Rupert Neve Designs in the USA

The post RUPERT NEVE DESIGNS 5034 Newton Channel Strip appeared first on soundspacethai.com.

สเตจบ๊อกซ์ TASCAM SB-16D, 16-Ins &16-Outs, Dante Analog Converter, TASCAM IO Control Software, Use Standalone or with Sonicview Mixers, 16 XLR Mic/Line Input Channels, Up to 96 kHz sampling and 32-bit precision

Audio professionals in search of I/O expansion for the Sonicview digital mixing console will be impressed with the TASCAM SB-16D, a 16-in / 16-out Dante stage box and standalone audio interface with built-in 32-bit / 96 kHz AD/DA converters and Class 1 HDIA (High Definition Instrumentation Architecture) microphone preamps, well suited for touring bands, concert halls, clubs, bars, special events, corporate meetings, and rental houses.

The stagebox includes 16 XLR inputs and 16 XLR outputs plus primary/secondary Dante I/O connectors and a DB-25 GPIO connector for events and relay applications. Control the SB-16D with the TASCAM IO Control app or with Sonicview series mixers. The stage box can be used on the floor, stacked, or racked in a standard 19″ rack case (3 RU). The SB-16D ships with a rackmount kit and mounting hardware

Features:

• Versatile 16-in/16-out configuration with redundancy
• Multiple boxes can be chained simultaneously in a Dante network for extended I/O
• 16 XLR mic/line inputs and 16XLR line outputs can accommodate a wide variety of studio situations, with stunning Class 1 HDIA mic preamps
• SIG OL LED signal indicators on both the XLR inputs and outputs to easily monitor your signal
• World-class 96kHz sampling and 32-bit precision for maximum fidelity
• Can be either floor installed or integrated into a 3U rack space
• Extensive integration with TASCAM Sonicview mixers, with full control of parameters directly from the mixer
• Remote control and offline editing also available by accessing the TASCAM IO control app
• 8-in/8-out expansion GPIO terminals (can be expanded to 16-in/16-out via a TASCAM Sonicview mixer)
• Exceptionally stable etherCON connectors to ensure your Dante system runs smoothly
• Full AES67 and SMPTE ST 2110 interoperability, in addition to Dante Domain Manager support

The post ดิจิตอลสเตจบ๊อกซ์ TASCAM SB-16D 16×16 Dante Stage Box appeared first on soundspacethai.com.

ดีไอบ๊อก 4 ชาแนลแบบ Active BEHRINGER DI4800A 4-channel Active Direct Box and Signal Splitter with 4 XLR Combi Inputs, 8 Transformer-isolated XLR Outputs, +6/+12dB Channel Boosts, and -20dB Pad Switches

The Behringer DI4800A 4-Channel Active DI-Box, Booster, and Line Isolator makes it easy to connect your instruments to your mixers and amplifiers. With four first-class DI channels on board, you’ll get flawless signal with zero distortion or dropouts. All from a unit that fits neatly in your rack unit.

The DI4800A offers powerful signal control – all at the touch of a button. Whether you’ve got low or high output instruments, you’ll get faithful audio reproduction courtesy of attenuation and boost controls. All you have to do is bring your talent.

Features:

• Professional and multi-purpose 4-channel direct injection box for stage and studio applications
• Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
• Ultra-flat frequency response due to renowned Behringer OT-1 transformers
• +18 dB gain boost of low level signals
• Ground lift switch eliminates typical ground loop problems
• Switchable -20 dB output attenuation
• XLR/TRS combo connectors for high flexibility
• Powered via external DC power supply (included

The post ไดเร็คบ็อก BEHRINGER DI4800A 4-Channel Active DI-Box appeared first on soundspacethai.com.

ไดเร็คบ๊อก ART Dual RDB 2-channel passive direct box, Re-amping interface for multiple amps, Stereo/Dual direct box, Variable Input pad for mic or instrument inputs, Stereo Audio/Video interface to low level inputs

The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or ¼-inch instrument level inputs.

The unit has two high quality isolation transformers that prevent ground loops when connecting various systems together. The Dual RDB accepts 1/4″ TRS and XLR line level inputs and outputs mic or instrument levels.

The Dual RDB’s variable level controls allow volume control to be set at the source rather than in the studio, AV room, audio closet or installation rack. A 20Hz to 20kHz frequency response ensures the Dual RDB will function transparently with any high quality audio source

Features:

• Re-amping interface for multiple amps
• Stereo/Dual direct box
• Variable Input pad for mic or instrument inputs
• Stereo Audio/Video interface to low level inputs

The post ไดเร็คบ๊อก ART Dual RDB Dual Re-Amping Direct Box appeared first on soundspacethai.com.