หัวคอนเน็คเตอร์ หัวงอตัวผู้ XLR NEUTRIK NC3MRX สีเงิน 3 pole Male cable connector, Slim right-angle connector helps navigate tight spaces, Easy to assemble with excellent strain relief, Colored rings and boots available for coding or identification

The Neutrik NC3MRX 3 Pole Right Angle XLR Male Cable Connector is the right angle version of the XX connector series cable. This cable connector offers features which make it more reliable, easier to assemble, and improves contact integrity as well cable strain relief.

Features:

• Slim right-angled connector
• 7 selectable cable outlet positions
• Male connector with improved locking recess without “window,” more stringent housing increases durability
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland offers high protection against cable bending stresses
• Colored rings and boots available for coding or identification
• Sleek and ergonomic design makes it valuable and handy

The post หัวแจ็คงอ XLR ตัวผู้ NEUTRIK NC3MRX Male XLR Connector appeared first on soundspacethai.com.

สายแลนสำเร็จรูป MIDAS CAT5E-10M พร้อมหัวเป็นสายแลนสำหรับเชื่อมต่อระหว่างมิกเซอร์ดิจิตอลของ MIDAS กับ Stage Box, ความยาว 10 เมตร, Ruggedised Cat5e UTP network cable with industry standard RJ-45 connectors, Designed and engineered in the U.K

The CAT5E-10M ruggedised Cat5e cable provides a bidirectional digital audio network data link and features industry-standard RJ45 connector carriers with an integral O-ring gasket to achieve IP54 water protection for high reliability, especially desirable in concert touring and festival applications.

When used with Midas PRO and M Series and Klark Teknik products equipped with HyperMAC and copper snake interfaces, the CAT5E-10M cable can transmit up to 192 bidirectional channels of 24 bit digital audio at 96 kHz sample rate.

CAT5E-10M also supports 24 bidirectional channels and 48 bidirectional channels at 96 kHz and 48 kHz sample rates respectively for AES50 connections. CAT5E-10M can also be used for standard Ethernet applications, and is suitable for both 100 Mbit/s and Gigabit networks.

The CAT5E-10M cable uses highly durable upjacketed Belden 1305A unscreened cable with a nominal 7.6 mm diameter. The 1305A cable features 24 AWG bonded-pair stranded (7/32) copper conductors with polyolefin insulation and both inner and outer PVC protective jackets.

Features:

• Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
• Length 10 metre
• 1-Year Warranty Program*
• Designed and engineered in the U.K.

The post สายแลน MIDAS CAT5E-10M Ruggedised Cat5e UTP Network Cable appeared first on soundspacethai.com.

สายแลนสำเร็จรูป MIDAS CAT5E-5M พร้อมหัวเป็นสายแลนสำหรับเชื่อมต่อระหว่างมิกเซอร์ดิจิตอลของ MIDAS กับ Stage Box, ความยาว 5 เมตร, Ruggedised Cat5e UTP network cable with industry standard RJ-45 connectors, Designed and engineered in the U.K

The CAT5E-5M ruggedised Cat5e cable provides a bidirectional digital audio network data link and features industry-standard RJ45 connector carriers with an integral O-ring gasket to achieve IP54 water protection for high reliability, especially desirable in concert touring and festival applications.

When used with Midas PRO and M Series and Klark Teknik products equipped with HyperMAC and copper snake interfaces, the CAT5E-5M cable can transmit up to 192 bidirectional channels of 24 bit digital audio at 96 kHz sample rate.

CAT5E-5M also supports 24 bidirectional channels and 48 bidirectional channels at 96 kHz and 48 kHz sample rates respectively for AES50 connections. CAT5E-5M can also be used for standard Ethernet applications, and is suitable for both 100 Mbit/s and Gigabit networks.

The CAT5E-5M cable uses highly durable upjacketed Belden 1305A unscreened cable with a nominal 7.6 mm diameter. The 1305A cable features 24 AWG bonded-pair stranded (7/32) copper conductors with polyolefin insulation and both inner and outer PVC protective jackets.

Features:

• Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
• Length 5 metre
• 1-Year Warranty Program*
• Designed and engineered in the U.K.

The post สายแลน MIDAS CAT5E-5M Ruggedised Cat5e UTP Network Cable appeared first on soundspacethai.com.

สายแลนสำเร็จรูป MIDAS CAT5E-1M พร้อมหัว เป็นสายแลนสำหรับเชื่อมต่อระหว่างมิกเซอร์ดิจิตอลของ MIDAS กับ Stage Box, ความยาว 1 เมตร, Ruggedised Cat5e UTP network cable with industry standard RJ-45 connectors, Designed and engineered in the U.K

The CAT5E-1M ruggedised Cat5e cable provides a bidirectional digital audio network data link and features industry-standard RJ45 connectors with an integral O-ring gasket to achieve IP54 water protection for high reliability, especially desirable in concert touring and festival applications.

When used with Midas PRO and M Series and Klark Teknik products equipped with HyperMAC and copper snake interfaces, the CAT5E-1M cable can transmit up to 192 bidirectional channels of 24 bit digital audio at 96 kHz sample rate.

CAT5E-1M also supports 24 bidirectional channels and 48 bidirectional channels at 96 kHz and 48 kHz sample rates respectively for AES50 connections. CAT5E-1M can also be used for standard Ethernet applications, and is suitable for both 100 Mbit/s and Gigabit networks.

The CAT5E-1M cable uses highly durable upjacketed Belden 1305A unscreened cable with a nominal 7.6 mm diameter. The 1305A cable features 24 AWG bonded-pair stranded (7/32) copper conductors with polyolefin insulation and both inner and outer PVC protective jackets.

Features:

• Ruggedised Cat5e UTP network cable with Neutrik etherCON* connectors
• Length 1 metre
• 1-Year Warranty Program*
• Designed and engineered in the U.K.

The post สายแลน MIDAS CAT5E-1M Ruggedised Cat5e UTP Network Cable appeared first on soundspacethai.com.

หัวสเปคคอน BEHRINGER ST4-BU สำหรับต่อสายเข้าตู้ลำโพงแบบ 4 ขา 4-pole speaker twist connectors with black and blue polyvinyl housing, Ergonomic design and easy to assemble, For cable diameters of 6-14 mm, Perfect for passive speakers and monitor

The ST4-BU 4-pole twist-locking speaker connector is great for live sound applications when you need to hook up some passive speakers or subwoofers. It features a convenient screw connection that allows you to assemble a cable without soldering.

Its protective chuck and rubber sleeve offer excellent strain relief. With these robust features, your cables will remain reliable, show after show.

Features:

• High-quality 4-pole speaker twist connectors with black and blue polyvinyl housing
• Perfect for passive speakers, subwoofers, monitor speakers, bass speaker cabinets and more
• Convenient screw connection allows assembly without soldering
• Protective black chuck and rubber sleeve provides perfect strain relief
• Ergonomic design and easy to assemble
• For cable diameters of 6-14 mm

The post หัวสเปคคอน BEHRINGER ST4-BU Speaker Twist Connector appeared first on soundspacethai.com.

ดิจิตอลสเตจบ๊อก WAVES DSPRO StageGrid 4000 SoundGrid Stagebox for Use with eMotion LV1 Mixer, with 32 Analog Mic/Line Inputs, 16 Analog Line Outputs, 4 Stereo AES/EBU Ins/Outs, and 44.1-96 kHz Sample Rate, 4 RU Rackmountable Chassis

Waves DSPRO StageGrid 4000, a digital stagebox housed in a rugged 4 RU rackmountable chassis. With a secure etherCON port designed for simple hookup to an eMotion LV1 live mixer or any other SoundGrid-compatible hardware/software.

The StageGrid 4000 integrates easily into your stage- or studio-based setup. Its redundant AC power supply enables the stagebox to continue working even if power to primary power supply fails.

Each of the digitally controlled preamps offers up to 60 dB of gain, 48V phantom power with LED indication, and a locking XLR mic/line input jack. Analog outputs include 16 balanced XLR line outs and two 1/4″ stereo headphone output with their own level controls.

BNC wordclock I/O allows proper synchronization with other digital equipment, and eight channels of AES3 I/O are present for routing multichannel digital signal in and out of the stage box.

Features:

• 32-in/16-out I/O interface for Waves SoundGrid systems
• Makes a top-shelf companion to your eMotion LV1 live mixer
• Ideal for use at front of house or monitors
• 32 mic/line inputs with top-shelf preamps
• 16 balanced analog line outputs on high-quality XLR connectors
• Stereo AES/EBU digital I/O for added flexibility
• 2 convenient headphone outputs make monitoring easy
• Configurable sample rate of 44.1kHz, 48kHz, 88.2kHz, and 96kHz
• Integrates seamlessly with your SoundGrid network components through Ethernet
• Rugged 4U rack-mountable chassis

The post ดิจิตอลสเตจบ๊อก WAVES DSPRO StageGrid 4000 appeared first on soundspacethai.com.

Behringer P24HUB เป็น StageConnect Hub ที่ออกแบบมาสำหรับกระจายสัญญาณเชื่อมต่อกับ Personal Monitor Mixer, 16-ch Distribution Hub with StageConnect Bus Powering for 8 Personal Monitor Mixers, Auto-Ranging Switch-Mode Power Supply

The Behringer P24HUB is a central distribution hub for personal monitoring systems, designed to streamline setups on stage. It powers and distributes audio to up to eight daisy-chained Behringer P24 personal monitor mixers, simplifying cabling and management.

Using Behringer’s StageConnect protocol, the hub transmits multiple audio signals and control data over a single XLR cable. The hub delivers 24-bit uncompressed PCM audio at 44.1/48 kHz with sub-millisecond latency, ensuring high-quality and timely audio distribution.

The P24HUB offers both analog outputs (16 balanced 1/4″ TRS) for connecting to wireless in-ear monitor transmitters, and digital connectivity (AES50 and Ultranet) for integrating with other digital audio systems.

It is equipped with the StageTalk intercom system, which enables seamless communication between front-of-house engineers, stage technicians, and performers. The P24HUB is expandable, allowing multiple units to be daisy-chained together for larger setups. Housed in a durable 1 RU rackmount chassis, the hub is built for both touring and fixed installations.

Features:

• 16-channel distribution hub with StageConnect bus powering
• Compatible with the Behringer’s P24 personal mixers
• Includes AES50, Ultranet, and analog connectivity
• 4 front-panel StageConnect ports can power 2 daisy-chained mixers each
• 16 balanced analog outputs can route up to 8 personal stereo mixes to wireless IEM transmitters
• AES50 In and Thru with 48 bidirectional channels over Cat 5e
• Integrated sample-rate conversion accommodates 96kHz AES50-equipped devices
• 16-channel Ultranet input; comprehensive Ultranet I/O for compatibility with Behringer’s Powerplay equipment
• Provides pristine, low-latency audio up to 24-bit/48kHz
• Stable operation range of more than 130 ft. over a single XLR cable
• Road-ready 1U rackmount chassis
• Integrated auto-ranging switch-mode power supply

The post ฮับกระจายสัญญาณ BEHRINGER P24HUB StageConnect Hub for P24 appeared first on soundspacethai.com.

แร็ค ขนาด 19 นิ้ว สำหรับติดตั้ง DI Box ของ Radial ได้สูงสุด 8 ตัว Radial J-Rak 8, 2RU rack-mounting shelf for Radial DI (Direct Box) and splitters, Easy access to 8 DIs or splitters, Durable 14 gauge steel, DIs can be front or rear mounted

The J-Rak 8 Radial Rack & Panel Adapter from Radial Engineering is designed to accommodate up to 8 Radial standard format boxes and enables you to vertically mount the devices in 2 rack spaces (3.5″). Mounting the unit is easy; simply unscrew the bookend outer shell and slide into place. Secure the Radial device using the supplied screws.

When installed into a 2RU rack shelf the Panel Adapter enables you to temporarily fit your Radial product into a flight case, securely bolt it down to a podium or inside an amplifier cabinet should the need arise.

Features:

• Rackmount your favorite Radial DIs
• Mount up to 8 units in a single 2U rack shelf
• Tough 14-gauge steel construction to last a lifetime
• DIs can be front- or rear-mounted
• Keep your studio cleaner and more organized

The post กล่องแร็ค Radial J-Rak 8 8-space Rack Adapter appeared first on soundspacethai.com.

ขายึดมิกเซอร์ BEHRINGER P16-MB สำหรับ P16-M Digital Personal Mixer, Attaches to Music, Mic, and Drum Stands, Can Be Installed & Configured in Minutes, High-quality components, Designed and Engineered in Germany

The P16-MB from Behringer is a convenient metal mounting bracket designed to attach the P16-M Digital Personal Mixer to any standard mic, music, or drum stand. Exceptionally easy to use, this mounting bracket can be installed and configured in minutes. The P16-MB was designed and engineered in Germany.

Features:

• Securely mounts your Powerplay 16-M personal mixer to a music, mic, or drum stand
• Rugged construction, for ultra-stable performance
• High-quality components

The post แท่นวางมิกเซอร์ BEHRINGER P16-MB Mounting Bracket for P16-M appeared first on soundspacethai.com.

อุปกรณ์เสริม Yamaha RK-DM3 สำหรับยึดดิจิตอลมิกเซอร์กับแร็ค, For DM3 Standard and DM3-Dante Digital Mixers, Two Sturdy Metal Rack Ears, Products using three screws on each side, Included items Rack mount hardware (2pcs), Screws (6pcs)

The RK-DM3 Rackmount Kit from Yamaha is designed to allow you to mount a DM3 or DM3-D digital mixing console to a standard equipment rack. This kit includes two durable metal rack ears.

Features:

• Rackmount kit for Yamaha digital mixers
• Compatible with DM3S and DM3-D

The post อุปกรณ์ติดตั้งบนแร็ค YAMAHA RK-DM3 Rackmount Kit for DM3 Digital Mixers appeared first on soundspacethai.com.