เพาเวอร์แอมป์ Behringer A800 2-channel, 2 x 400W or 800W Bridged Mono Operation Reference Power Amplifier, Servo-controlled Design, Convection Cooling, Overload Protection, and LED Metering, For Studios, Live Sound and Production

The A800 Professional 800W Reference-Class Power Amplifier from Behringer is a lightweight power amplifier for recording studios, post-production houses, live sound, and hi-fi applications. It features many input connections such as balanced XLR, 1/4″ TRS, and RCA connectors, and twist-lock speaker and binding-post outputs for easy compatibility for just about any setup.

The A800’s D-Class power amplifier delivers 2 x 400W into 4 Ohms or 800W mono into 8 Ohms in bridged operation. Other features include: convection-cooling for noise-free and stable operation, precise level meter and clip indicators for accurate performance monitoring, and ultralow-impedance design that can drive any passive speaker such as studio monitors, small PA speakers, and more.

Features:

• Delivers 2 x 400 watts into 4 ohms, 800 watts into 8 ohms in bridged-mono operation
• Advanced convection-cooling technology ensures stable, noise-free operation
• Servo-controlled design accommodates nearly every passive speaker system
• Class D technology with near-zero thermal buildup runs extremely cool
• Efficient switch-mode power supply gives you low noise, superior transient response, and low power consumption
• SmartSense loudspeaker impedance compensation yields linear frequency response at any speaker load
• LED metering and clip indicators on each channel make accurate gain staging easy
• Rear-panel combo XLR, 1/4″ TRS, and RCA input connectors ensure compatibility with just about any source
• Reliable twist-lock speaker connectors prevent unwanted unplugging incidents
• Independent DC, LF, and thermal overload protection on each channel safeguards your amplifier and speakers

The post เครื่องขยายเสียง BEHRINGER A800 Stereo Power Amplifier appeared first on soundspacethai.com.

เครื่องขยายเสียงพกพาขนาดเล็ก Powersoft NOTA 142 Ultra Compact PoE Amplifier, Class-D Amplifier มีกำลังขยาย 2x140W 4 Ohms 2x70W 8 Ohms, Integrated DSP, PoE/PoE+ Powered, USB -C Connectivity, Auto Setup, Power Sharing, ควบคุมผ่านเครือข่าย

NOTA 142 is an ultra compact, versatile PoE/PoE+ amplifier designed for networked AoIP applications where space and wiring constraints are a concern.

Tailored for AV and IT system integrators, it offers an intuitive installation process with a single Ethernet cable for power and data.

With its modular design and flexibility, NOTA seamlessly integrates into existing systems and expands them as needed, ensuring efficient operation in any networked environment.

Features:

• PoE/PoE+ Integration Enables power and data transmission over Ethernet, simplifying installation and reducing wiring complexity.
• Compact & Space-Saving Design Highly compact form factor, ideal for installations with limited space, ensuring easy integration in tight environments.
• Optimized Performance Delivers 140 W power across two channels, ensuring high performance considering its compact form factor.
• Auto Setup Automatically measures the impedance curve of connected speakers and applies a high-pass filter in order to optimize sound quality and preserve the speakers.
• Onboard DSP Includes built-in DSP, offering audio control, speaker health monitoring, and system optimization.
• Control Options Compatible with ArmoníaPlus software and third-party software products through the available APIs for easy control.
• USB Connectivity Features a USB-C port for expanding systems by connecting external multimedia devices and acting as an USB to AES67 converter, enhancing system flexibility.
• AES67 Support Native support for the AES67 standard, enabling easy AoIP integration with other networked systems.
• Cloud Monitoring With Verso Gateway, the amplifier supports cloud monitoring via MyUniverso, allowing for real-time system diagnostics and control from anywhere.

The post เพาเวอร์แอมป์ Powersoft NOTA 142 Ultra Compact PoE Amplifier appeared first on soundspacethai.com.

เครื่องขยายเสียงสำหรับงาน Installation d&b audiotechnik D90 Mobile specific four channel amplifier 4x5400W 4 Ohms, 2700W 8 Ohms, Operating and Monitoring display, Color TFT touchscreen, 4.3″ / 480 x 272 pixel, Milan-enabled

The D90 amplifier represents a new performance level of four channel Class D amplifiers, purposely designed to meet vital requirements for touring and rental productions companies, where high flexibility with system design and production needs are imperative.

With key features such as maximum output voltage, digital signal processing capabilities, and the AutoStandby and AutoWakeup, the D90 amplifier reduces the overall power consumption of the system.

The D90 incorporates up to sixteen input channels with eight Milan audio inputs, four analogue inputs and four AES3 channels. It also incorporates comprehensive loudspeaker management, switchable filter functions, and definable equalization.

The D90 amplifier has a dynamic range of 119 dB (unweighted) and is designed to drive high voltage d&b loudspeakers while providing extensive protection capabilities.

The user interface of the amplifier consists of a 4.3″ (480 x 272 px) colour touchscreen in conjunction with a digital rotary encoder providing device configuration and enhanced status monitoring information.

The D90 amplifier features a flexible Fallback structure, ensuring the transmission of a secondary signal when required. Remote control and full system integration are realized using the d&b ArrayCalc simulation software and R1 Remote control software.

Features:

• High voltage output suitable for driving all d&b systems
• Increases overall system efficiency
• Energy-efficient for minimal ecological impact
• Enhanced DSP capabilities accommodates future system architecture

The post แอมพลิฟายเออร์ d&b audiotechnik D90 4-Channel Amplifier appeared first on soundspacethai.com.

เครื่องขยายเสียงสำหรับงาน Installation d&b audiotechnik D40 Mobile specific four channel amplifier 4x2400W 4 Ohms, 2000W 8 Ohms, Operating and Monitoring display, Color TFT touchscreen, 4.3″ / 480 x 272 pixel, Milan-enabled

This four channel Class D mobile amplifier provides the power density required for high-efficiency d&b systems including the KSL System, V-Series, Y-Series and T-Series. The D40 incorporates comprehensive loudspeaker management, switchable filtering functions as well as user definable equalization and delay capabilities.

Onboard enhanced energy saving features, power efficiency and Automatic Wake up enable you to save on resources and meet environmental responsibility requirements. The D40 incorporates up to 16 input channels with eight Milan audio inputs, four analogue inputs, and four AES3 channels.

The D40 utilizes a switch mode power supply with automatic mains range selection and active Power Factor Correction (PFC) to produce a clean current draw and ensure stable and efficient performance under adverse mains conditions.

Access to the d&b Remote network is via Ethernet using the Open Control Architecture protocol (AES70 / OCA). The D40 is controlled using the integrated web interface, which enables access via a browser, or using the d&b R1 Remote control software.

For applicable d&b loudspeakers, d&b LoadMatch enables the D40 amplifier to preserve tonal balance when cable lengths of up to 70 m (230 ft) are used.

Features:

• High voltage output suitable for driving applicable d&b loudspeakers, including the KSL System
• Increases overall system efficiency
• Advanced voltage management
• Energy-efficient for minimal ecological impact
• Enhanced DSP capabilities accommodates future system architecture

The post แอมพลิฟายเออร์ d&b audiotechnik D40 4-Channel Amplifier appeared first on soundspacethai.com.

แอมพลิฟายเออร์สำหรับงาน Installation d&b audiotechnik 40D 4-Channel Amplifier 4x2400W 4 Ohms, 2000W 8 Ohms, Monitoring display, Color TFT touchscreen, 4.3″ / 480 x 272 pixel, 12 configurable GPIOs (8x GPI, 4x GPO)

The 2 RU 40D amplifier provides the power density required for installation purposes while the powerful signal processing extends the level of functionality of the on-board features.

This device contains extended input management functionalities with separate Input Gain control for each input channel, General Purpose Inputs/Outputs (GPIO) and a General Fault connector. Enhanced system status monitoring functions such as Input and Load monitoring ensure suitability in an emergency situation.

The user interface of the amplifier consists a 4.3″ color touchscreen providing comprehensive information of the device configuration and enhanced status monitoring. The DSP integrated within the 40D incorporates comprehensive loudspeaker management, switchable filtering functions as well as user definable equalization and delay capabilities.

The user defineable equalizer features two independent 16-band EQ groups within each channel, providing parametric, notch, shelving and asymmetric filters as well as a graphic EQ (via the d&b R1 Remote control software). The delay capability covers a range of up to 10 s. All loudspeaker specific functions such as CUT, HFA, HFC, THC or CPL are available. The DSP unit of the amplifier has a fixed latency of 0.3 ms.

All functions of the 40D are configured via the d&b Remote network via Ethernet (AES70/OCA). To operate the device, the d&b R1 Remote control software is required. The initial configuration of the network parameters after a factory reset can also be done via web browser.

For applicable loudspeakers, d&b LoadMatch enables the 40D amplifier to electrically compensate for the properties of the cable used to connect the loudspeakers to the amplifier output. This function which covers a bandwidth of up to 20 kHz preserves the tonal balance when cable lengths of up to 70 m (230 ft) are used.

Due to its design LoadMatch does not require additional wires and is therefore applicable with any connector type used. To provide optimum compensation, cable length and cross-sectional data as well as the number of loudspeakers connected to the amplifier channel can be entered on the amplifier.

Features:

• High voltage output suitable for driving applicable d&b loudspeakers, including the KSLi System
• Information-rich monitoring display, including device status, speaker setups, Input and Load monitoring, GPIO status, fault indication and more
• Dynamic range (SNR) digital input 116 dB unweighted
• Enhanced energy saving features (Eco mode)
• Eight GPI and four GPO plus a separate general FAULT connector
• Flexible Fallback structure, ensuring the transmission of a secondary signal when required
• Supports d&b ArrayProcessing which improves tonal balance and coverage across the audience area
• OCA/AES70 protocol for easy integration into third party environments using the R90 Touchscreen remote control
• Broad variety of third party integration including Beckhoff, Q-SYS, Crestron, AMX, MediaMatrix

The post เครื่องขยายเสียง d&b audiotechnik 40D 4-Channel Amplifier appeared first on soundspacethai.com.

เพาเวอร์แอมป์ Behringer NX6000D เป็นเพาเวอร์แอมป์แบบ Class-D Technology มีกำลังขับ 2 x 3000 วัตต์ into 4 Ohms , 2 x 1600 วัตต์ into 8 Ohms, DSP Control and SmartSense Loudspeaker Impedance Compensation, Free App for PC via USB

Behringer NX6000D, a 2 RU, two-channel 6000W amplifier with a built-in DSP speaker processor and SmartSense impedance compensation that delivers a linear response at any speaker load impedance. The amplifier features a zero-attack limiter that provides maximum output level with exceptionally reliable overload protection.

The NX6000D delivers 3000W into 4 ohms and 1600W into 8 ohms, giving you flexibility when deploying your sound system. The integrated DSP features sophisticated crossovers, delay, EQ, and dynamics processing. Inputs are available via two combo XLR-1/4″ inputs, while the speaker outputs utilize NL4 speakON speaker connectors.

Program the DSP via the onboard amber backlit display or connect to a PC and use the free NX EDIT app for the ultimate speaker control. A power cord is included.

Features:

• Delivers 3,000W/channel into 4 ohms or 1,600W/channel into 8 ohms
• Class D technology with “near-zero” thermal buildup runs extremely cool
• Efficient switch-mode power supply gives you low noise, superior transient response, and low power consumption
• SmartSense loudspeaker impedance compensation yields linear frequency response at any speaker load
• Impressive damping factor offers superior amplifier control over your speakers
• Zero-attack limiters supply maximum output with reliable overload protection
• High-performance DSP offers sophisticated delay, a crossover, EQ, dynamics processing, and more
• 24-bit/96kHz converters ensure excellent signal integrity and ample dynamic range
• Positive-detent gain controls with 4-segment LED metering on each channel make gain-staging easy
• Rear-panel combo XLR and 1/4″ TRS input connectors ensure compatibility with just about any source
• Reliable twist-lock speaker connectors prevent unwanted “unplugging” incidents
• Thermal overload protection protects your amplifier and speakers

The post เครื่องขยายเสียง BEHRINGER NX6000D Amplifier With DSP appeared first on soundspacethai.com.

เครื่องขยายเสียง 4 ชาแนล QUEST QXD-10K Power Amplifier with DSP and Network เป็นเพาเวอร์แอมป์ขนาด 2RU มีกำลังขยาย 4x 2500 วัตต์ Class-D amplifier, supports 8 Ω, 4 Ω, 70V, and 100V operation, DSP 32bit/96kHz FIR/IIR Filters, Limiters, Speaker Libraries

The QXD-10K is a flagship 2RU, 4 x 2500W Class-D amplifier delivering extremely high output with refined efficiency and ultra-low distortion. Designed for the most demanding installed sound applications, it supports 8 Ω, 4 Ω, 70V, and 100V operation and delivers up to 10,000W total continuous power.

Leveraging UMAC™ Class-D technology, the QXD-10K integrates 32bit/96kHz DSP for advanced signal processing with FIR/IIR filters, peak and RMS limiters, and Quest’s proprietary speaker tuning libraries. A front-mounted high-resolution TFT display with LED encoder allows intuitive configuration, supported by RJ45 and GPIO connectivity for system-wide control and monitoring.

Equipped with Neutrik speakON® outputs and powerCON® mains input, the QXD-10K ensures secure connections in high-power environments. Optional Dante™/AES67 audio-over-IP integration enables full compatibility with networked audio systems.

Features:

• Channels: 4 x 2500W (Low-Z, 70V, or 100V)
• DSP: 32bit/96kHz FIR/IIR Filters, Limiters, Speaker Libraries
• Mounting: 2RU Rack
• Control: RJ45 & GPIO, Front TFT Display
• Options: Dante™/AES67 Expansion Card

The post เพาเวอร์แอมป์ QUEST QXD-10K 4-Ch Power Amplifier appeared first on soundspacethai.com.

เพาเวอร์แอมป์ Dynacord IX30:4 แบบ 4 ชาแนล 4-channel networked DSP amplifier with 3kW powerTANK for Hi-Z and Lo-Z operation, 8 x 8 Dante with OCA/AES70 remote control, 4 mic/line inputs usable as Dante break-in, 96 kHz fully featured DSP matrix

The IX30:4 is a 4-channel networked DSP amplifier with 6 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX30:4 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality.

IX30:4 features eight (8) Dante inputs, eight (8) Dante outputs and four (4) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 12 x 12 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 12 inputs feature pilot-tone detection, while the eight (8) Dante and four (4) amplifier outputs allow to add pilot tones up to 30 kHz.

The IX30:4 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices.

IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.

Features:

• 4-channel networked DSP amplifier with 3 kW powerTANK for Hi-Z and Lo-Z operation
• 8 x 8 Dante with OCA/AES70 remote control, 4 mic/line inputs usable as Dante break-in
• 96 kHz fully featured DSP matrix mixer and MXE-style TaskEngine for system logic, automation, scheduling and integration
• ghostPOWER via PoE to maintain DSP, Dante network and mic/line inputs
• High efficiency ecoRAIL technology for lower operating costs

The post เพาเวอร์แอมป์ Dynacord IX30:4 4-channel DSP Amplifier appeared first on soundspacethai.com.

เพาเวอร์แอมป์ Dynacord IX15:4 แบบ 4 ชาแนล 4-channel networked DSP amplifier with 1.5 kW powerTANK for Hi-Z and Lo-Z operation, 8 x 8 Dante with OCA/AES70 remote control, 4 mic/line inputs usable as Dante break-in, 96 kHz fully featured DSP matrix

The IX15:4 is a 4-channel networked DSP amplifier with 1.5 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX15:4 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality.

IX15:4 features eight (8) Dante inputs, eight (8) Dante outputs and four (4) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 12 x 12 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 12 inputs feature pilot-tone detection, while the eight (8) Dante and four (4) amplifier outputs allow to add pilot tones up to 30 kHz.

The IX15:4 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices.

IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.

Features:

• 4-channel networked DSP amplifier with 1.5 kW powerTANK for Hi-Z and Lo-Z operation
• 8 x 8 Dante with OCA/AES70 remote control, 4 mic/line inputs usable as Dante break-in
• 96 kHz fully featured DSP matrix mixer and MXE-style TaskEngine for system logic, automation, scheduling and integration
• ghostPOWER via PoE to maintain DSP, Dante network and mic/line inputs
• High efficiency ecoRAIL technology for lower operating costs

The post เพาเวอร์แอมป์ Dynacord IX15:4 4-channel DSP Amplifier appeared first on soundspacethai.com.

เครื่องขยายเสียง WORK PA 2120L 70/100 V line แบบ 2 ชาแนลสำหรับงานระบบประกาศ, Class D มีกำลังขยายชาแนลละ 120 วัตต์, Switch mode power supply, 70 / 100V operation selectable, Volume control on each channel, Euroblock connectors, 1 HU rack 19 inch

PA 2120 L is an installation amplifier with 2 channels of 120W each, class D. It can work both in 70V and 100V line (selectable through dip-switches). Each channel has its own volume control and LED indicators (signal, clip, and protect).

The PA 2120 L amplifier integrates various protections such as short circuit, thermal, ultrasound and RF. Its inputs and outputs are connected through Euroblock terminals, and it has dimensions of 1 HU rack 19 ”.

Features :

• Switch mode power supply.
• 70 / 100V operation (selectable).
• Volume control on each channel.
• 1 HU Rack 19 inch.

The post เพาเวอร์แอมป์ WORK PA 2120L Power Amplifier 100V 2ch appeared first on soundspacethai.com.