Radial – soundspacethai.com

กล่องแร็ค Radial J-Rak 8 8-space Rack Adapter

Sound Space — Tue, 23 Sep 2025 12:58:21 +0000

Radial J-Rak 8 Radial Rack & Panel Adapter

แร็ค ขนาด 19 นิ้ว สำหรับติดตั้ง DI Box ของ Radial ได้สูงสุด 8 ตัว Radial J-Rak 8, 2RU rack-mounting shelf for Radial DI (Direct Box) and splitters, Easy access to 8 DIs or splitters, Durable 14 gauge steel, DIs can be front or rear mounted

The J-Rak 8 Radial Rack & Panel Adapter from Radial Engineering is designed to accommodate up to 8 Radial standard format boxes and enables you to vertically mount the devices in 2 rack spaces (3.5″). Mounting the unit is easy; simply unscrew the bookend outer shell and slide into place. Secure the Radial device using the supplied screws.

When installed into a 2RU rack shelf the Panel Adapter enables you to temporarily fit your Radial product into a flight case, securely bolt it down to a podium or inside an amplifier cabinet should the need arise.

Features:

Rackmount your favorite Radial DIs
Mount up to 8 units in a single 2U rack shelf
Tough 14-gauge steel construction to last a lifetime
DIs can be front- or rear-mounted
Keep your studio cleaner and more organized

The post กล่องแร็ค Radial J-Rak 8 8-space Rack Adapter appeared first on soundspacethai.com.

Radial J+4 2-channel Signal Level Driver

Sound Space — Tue, 23 Sep 2025 12:43:51 +0000

Radial J+4 Balanced Signal Driver Stereo Preamplifier

ปรีแอมป์สเตอริโอ Line Driver Radial J+4, Signal Driver with Level Matching from -10dB to +4dB, Increases Gain for Low-Output Sources, Transformer-Balanced XLR Outputs, Multiple input connector options to interface with any device

The J+4 is a stereo interface designed to accept unbalanced low output devices such as instruments, computers or mobile devices and boost their signal to a balanced +4dB level for connection to professional audio recording and playback equipment.

Features:

Increases gain of low-output instruments, computers, and music players
Onboard stereo preamp boosts low-level signals to +4dB line level
Transformer isolation eliminates noise due to ground loops
Generous connectivity:
- 2 x 1/4″ jacks
- 2 RCA jacks
- 1/8″ stereo TRS
S/N ratio: greater than 95dB

The post Radial J+4 2-channel Signal Level Driver appeared first on soundspacethai.com.

Radial SGI (Set) Instrument Line Driver System

Sound Space — Sat, 13 Sep 2025 14:51:56 +0000

Radial SGI (Set) Instrument Line Driver System for Guitar and Bass

อินเตอร์เฟส Radial SGI (Set) Instrument Balanced Line Driver System for Guitar and Bass with SGI-RX Receiver and SGI-TX Transmitter, Jensen transformers, Send signal up to 100 meters (300ft) without loss, Delivers natural tone to off-stage amplifiers

The SGI sends guitar signals across long distances without signal loss or noise, while retaining the original tone of the instrument. In the studio, it allows the guitarist to sit in the control room and connect to a distant guitar amp.

On stage, the SGI can be used to play the guitar amp using off-stage isolation cabinets or it can be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers.

Features:

Instrument line driver system that allows you to take any unbalanced 1/4-in. instrument signal and drive it up to 300 ft. via balanced XLR
Bundle includes the SGI-TX transmitter and the SGI-RX receiver
Defeats the diminished top-end detail and noise often introduced by long 1/4-in. cable runs
Both the transmitter and the receiver boast premium Jensen transformers to send your signal with a wide, flat frequency response, reduced noise, enhanced dynamic range, and an optimized signal-to-noise ratio
SGI-TX features a Drag control that allows you to dial in the optimal load for your guitar’s pickups
SGI-RX comes equipped with a Ground Lift button to cut out ground-related noise
Perfect for tracking guitar parts in the control room or routing your signal to a far-off backline when you’re performing
Includes a 15V power supply, and the system has been updated to accept most pedalboard-standard power supplies

The post Radial SGI (Set) Instrument Line Driver System appeared first on soundspacethai.com.

Radial Catapult Mini TRS 4-Ch Compact Cat 5 Audio Snake

Sound Space — Sat, 13 Sep 2025 14:46:33 +0000

Radial Catapult Mini TRS Cat 5/6 Audio Snake Module with 1/4 inch TRS Connectors

อุปกรณ์ส่งสัญญาณเสียง analog ผ่านสายแลน Radial Catapult Mini TRS, Sends Analog Audio over Cat 5/6 Cable, Four Female XLR Inputs, RJ45 Input or Output, 7 Hz to 20 kHz Frequency Response, Powder-Coated Steel Chassis, Color-Coded Heatshrink Labels

The Catapult Mini TRS from Radial Engineering is a 4-channel audio snake. It allows you to send four channels of audio over a Cat 5 or 6 Ethernet connection without signal loss, noise, or interference. The device is analog, obviating any need for digital conversion. Use this snake to minimize cable clutter on stages.

The Catapult Mini TRS features four male 1/4″ TRS inputs on cable tails and an RJ45 I/O port, which can either send or receive analog audio over Cat 5 or 6 Ethernet cables. The housing is made of 16-gauge steel for handling any environment and is powder coated.

Expando-mesh sheathing provides an extra measure of durability, protecting cables from damage. Finally, color-coded heatshrink labels help you to identify your individual TRS connections at a glance.

Features:

Transforms a standard Cat 5 or Cat 6 cable into a 4-channel analog snake (when used in conjunction with another Catapult MINI module (sold separately)
Uses the analog conductors in any shielded Cat 5 or Cat 6 cable to deliver 4 balanced audio lines
Employs straight-wire passive operation — it’s analog all the way, with no digital conversion
Can also work via a building’s pre-existing Ethernet network

The post Radial Catapult Mini TRS 4-Ch Compact Cat 5 Audio Snake appeared first on soundspacethai.com.

Radial Catapult Mini RX 4-Ch Compact Cat 5 Audio Snake

Sound Space — Sat, 13 Sep 2025 14:33:36 +0000

Radial Catapult Mini RX Cat 5/6 Audio Snake Module with Male XLR Connectors

อุปกรณ์รับสัญญาณเสียง analog ผ่านสายแลน Radial Catapult Mini RX, Receives Analog Audio over Cat 5/6 Cable, Four Female XLR Inputs, RJ45 Output, 7 Hz to 20 kHz Frequency Response, Powder-Coated Steel Chassis, Color-Coded Heatshrink Labels

The Catapult Mini RX from Radial Engineering acts as a 4-channel audio snake. It features an RJ45 input, which receives four channels of analog audio over Cat 5/6 Ethernet cables. Four male XLR outputs on cable tails allow you to plug directly into inputs of a mixer or recording interface. The housing is made of 16-gauge steel for handling any environment and is powder coated.

Features:

Transforms a standard Cat 5 or Cat 6 cable into a 4-channel analog snake (when used in conjunction with a Catapult MINI TX (sold separately)
Uses the analog conductors in any shielded Cat 5 or Cat 6 cable to deliver 4 balanced audio lines
Employs straight-wire passive operation — it’s analog all the way, with no digital conversion
Works with a building’s existing cable infrastructure

The post Radial Catapult Mini RX 4-Ch Compact Cat 5 Audio Snake appeared first on soundspacethai.com.

Radial Catapult Mini TX 4-Ch Compact Cat 5 Audio Snake

Sound Space — Sat, 13 Sep 2025 14:21:48 +0000

Radial Catapult Mini TX Cat 5/6 Audio Snake Module with Female XLR Connectors

อุปกรณ์ส่งสัญญาณเสียง analog ผ่านสายแลน Radial Catapult Mini TX, Sends Analog Audio over Cat 5/6 Cable, Four Female XLR Inputs, RJ45 Output, 7 Hz to 20 kHz Frequency Response, Powder-Coated Steel Chassis, Color-Coded Heatshrink Labels

The Catapult Mini TX from Radial Engineering acts as a 4-channel audio snake. It allows you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed.

The Catapult Mini TX features four female XLR inputs on cable tails and an RJ45 output, which sends analog audio over cat 5/6 Ethernet cables. The housing is made of 16-gauge steel for handling any environment and is powder coated.

Features:

Transforms a standard Cat 5 or Cat 6 cable into a 4-channel analog snake (when used in conjunction with a Catapult MINI RX (sold separately)
Uses the analog conductors in any shielded Cat 5 or Cat 6 cable to deliver 4 balanced audio lines
Employs straight-wire passive operation — it’s analog all the way, with no digital conversion
Can also work via a building’s pre-existing Ethernet network

The post Radial Catapult Mini TX 4-Ch Compact Cat 5 Audio Snake appeared first on soundspacethai.com.

สปริตเตอร์แยกสัญญาน Radial Exo-Pod Passive Line-level Broadcast Splitter

Sound Space — Sat, 13 Sep 2025 08:43:55 +0000

Radial Exo-Pod Passive Line-level Broadcast Splitter

สปริตเตอร์ Radial Exo-Pod แยกสัญญาน Splits Balanced Signal to 14 Outputs, 10 x Transformer-Isolated XLR Outputs, 14-Gauge Steel Case Reduces RFI, Ground Lift Switch on Each XLR Channel, Trim Pot Works across 14 Channels, Suitable for Broadcast Purposes

The Exo-Pod take a line-level XLR input and splits it cleanly to ten XLR outputs and four 3.5mm TRS jacks for connection to video cameras, hand-held recorders, tablets or other media systems.

A variable input trim allows the broadcast technician to reduce the global output level locally for convenience, and all of the outputs are transformer isolated to eliminate hum and buzz that is often encountered due to ground loops.

The XLR outputs are supplemented with individual ground lift switches to further abate noise, and an XLR thru connector allows multiple Exo-Pods to be linked together to provide an expandable solution to handle events of any size.

Features:

Transformer-isolated passive splitter that’s perfect for broadcast applications
1-in to 14-out design allows ample distribution paths
Balanced line-level XLR input handles up to +24dB
Trim control lets you attenuate the input independently of source volume
Daisy-chain multiple Exo-Pods for large events via balanced TRS jacks

The post สปริตเตอร์แยกสัญญาน Radial Exo-Pod Passive Line-level Broadcast Splitter appeared first on soundspacethai.com.

สปริตเตอร์แยกสัญญาน Radial LX8 Line Level Signal Splitter & Isolator

Sound Space — Sat, 13 Sep 2025 08:23:52 +0000

Radial LX8 8-channel Balanced Line Splitter with Isolation

สปริตเตอร์ Radial LX8 แยกสัญญาน 8-channel Passive Line-level Audio Splitter with D-Sub/Phoenix Connectors and Jensen Output Transformer, 1U metal chassis slips into any rack, Perfect for hybrid live/recording rigs and houses of worship

The Radial LX8 is designed specifically to manage balanced signal splitting in professional audio systems. The single rack space design begins with a 100% passive circuit which means it does not require any power to operate.

Inside, each of the eight channels is equipped with a premium Jensen® JT-123-SLPC transformer that is able to handle transients in excess of +26dB at all frequencies right down to 20Hz without audible distortion. This results in an accurate signal transfer with minimal phase shift or distortion.

When used in larger systems, you benefit from significantly lower noise, making the LX8 the best choice for any demanding multi-channel audio system.

Features:

Sends 8 channels to any of 3 destinations (switchable)
100% passive design — requires no power
1U metal chassis slips into any rack
Accurate signal transfer without phase shifts or artifacts
Perfect for hybrid live/recording rigs and houses of worship
Sweetens eight channels of audio in the studio
Transformer-isolated output sports a vintage-colored Jensen
Auxiliary output is shield from ground loops to prevent noise
Direct output retains the integrity of your source audio
Handles transient peaks of +26dB without clipping
Handles frequencies down to 20Hz with extremely low distortion

The post สปริตเตอร์แยกสัญญาน Radial LX8 Line Level Signal Splitter & Isolator appeared first on soundspacethai.com.

สปริตเตอร์แยกสัญญาน Radial OX8-j Jensen-equipped 8-channel Microphone Splitter

Sound Space — Thu, 11 Sep 2025 09:44:28 +0000

Radial OX8-j Jensen-equipped 8-channel Microphone Splitter

ตัวแยกสัญญานไมโครโฟน 8 ชาแนลแบบเข้าแร็ค Radial OX8-j 8-channel Mic Splitter Box with One Input, Three Outputs, 36dB pad, Jensen Transformers, and Passive Design, Ideal for live recording and signal distribution

Radial OX8-J splitter is an incredible box in its own right. But for folks who need the lowest levels of distortion possible and maximum signal integrity, the Radial OX8-j with Jensen transformers is your ticket to unreal audio. Each of the OX8-j’s eight channels features an input and three outputs: a direct feed for 48V phantom return.

An auxiliary feed with ground lift switch, and a transformer-isolated output. It’s ideal for microphone applications, but a selectable 36dB pad makes this box great for other signal sources as well,

Whether you’re using it for live performances or in the studio. Housed in a heavy-duty steel enclosure, the Radial OSXJ with Jensen transformers is built to last too.

Features:

Compact 8-channel multipurpose mic splitter
Low-distortion Jensen transformers preserve the integrity of your signal
Completely passive design — requires no power
Rear panel D-sub and Euro (Phoenix) screw terminals
Ideal for live recording and signal distribution
19″ heavy-duty steel rackmountable enclosure

Resources

The post สปริตเตอร์แยกสัญญาน Radial OX8-j Jensen-equipped 8-channel Microphone Splitter appeared first on soundspacethai.com.

Radial SW8-USB Dual-USB Auto-Switcher and Interface

Sound Space — Thu, 11 Sep 2025 08:02:17 +0000

Radial SW8-USB Dual-USB Auto-Switcher and Interface

ออโต้สวิตช์และอินเตอร์เฟส Radial SW8-USB, Dual USB Interface and Auto-switcher with 24-bit/192kHz Converters, 8 Balanced Analog Outputs on 1/4″ TRS, Synchronize both playback systems using MTC, All-in-one backing track solution, Exclusively for MacOS

The SW8-USB is the complete solution for performances that utilize redundant playback systems for backing tracks, combining two built-in high performance USB interfaces with an auto-switching feature that detects dropouts and effortlessly switches to the backup computer in an instant.

Dual USB inputs with separate 24bit/192kHz converters allow two computers to be connected in tandem, so digital workstations on both machines can connect to the SW8-USB as an audio and MIDI interface.

Start/stop synchronization is also possible between both computers through MTC, ensuring flawless switching between playback rigs with less equipment than ever.

Features:

Easily switch between redundant playback systems
2 USB ports with 24-bit/192kHz converters eliminate the need for additional audio interface
8 channels of high-quality audio
Manual or seamless automatic switching
Line-level and transformer-isolated mic level outputs
Synchronize both playback systems using MTC
All-in-one backing track solution
Exclusively for MacOS

The post Radial SW8-USB Dual-USB Auto-Switcher and Interface appeared first on soundspacethai.com.