หัวแอมป์เบสไฟฟ้า Hartke TX600, มีกำลังขับ 600 วัตต์ RMS Class D Amplification, Class A Tube Preamp Circuitry, Tone Stack EQ with Bass, Mid & Treble, On-Board Compressor, Separate Active & Passive Inputs, 3.5mm Auxiliary Input & Headphone Out, Balanced XLR Output for DIs

The Hartke TX600 is an amplifier head intended for electric bass. Providing 600W of Class D amplification, a 12AX7 Class A tube preamp, and a wide array of tone-shaping options, the TX600 is portable to boot, featuring a compact construction and a relatively light weight of 7 lb.

The front panel offers two input jacks—one for passive instruments, one for active—as well as 3.5mm auxiliary input and headphones output jacks. Consider the tone-stack EQ, which provides two separate controls for treble (a bright switch offering extra high-frequency attack), as well as the ability to shape a variable frequency band between 200 and 800 Hz; these controls, combined with the bass knob, allow you to dial in a most satisfactory sound for your bass, whether you prefer a biting growl or a scooped, smile-curved sound. An on-board compressor can help to reduce sudden peaks and increase sustain, while a mute knob will kill all outgoing signal, if that’s your wish.

The rear of the amplifier provides a panoply of connection jacks, including XLR and speakON connection points for external speakers, and a balanced XLR output for DI’ing the sound of the amplifier. An on-board preamp output jack allows you to route your preamp into an external power amplifier or mixing console; likewise, a power amp input jack allows you to use a separate preamp with this unit, should you desire to do so.

Features:

• 600-watt Class D bass amplifier that weighs 7lb
• Classic 12AX7 Class A tube preamp circuitry
• Tone stack EQ section including Shape, Frequency, Bass and Treble controls
• Compressor knob controls bass dynamics
• Brite button for increased high frequency attack
• 1/4″ Active and Passive inputs, 1/8″ Aux input, 1/8″ headphone output
• Balanced XLR direct output, Output Mute switch
• Integrated carry handle, Rugged anodized aluminum chassis

The post หัวแอมป์เบส Hartke TX600 Bass Head Amplifier 600W appeared first on soundspacethai.com.

หัวแอมป์เบสไฟฟ้า Hartke LH500 , Classic 12AX7 High Voltage Class-A tube preamp circuit มีกำลังขับ 500 วัตต์ 4 ohms, Selectable Brite switch, Selectable limiter, Front panel XLR balanced direct output, Rear panel 1/4″ effects loop, 1/4″ output connectors

The LH500, like its big brother, has a classic 12AX7 Class-A tube front-end design with a solid-state output. Developed with the HyDrive cabs in mind, the LH500 also has more than enough power and tone control to drive any cabinet on the market. This amp provides you with Treble and Bass Shelving to give its warm tone a little edge. Or use the brite and limiter switches to further sculpt your sound. Its intuitive front panel also makes adjustments on the fly a breeze.

The LH500 packs a big punch in a portable, roadworthy package. A 2-rackspace metal frame chassis, steel faceplate and handles allow for easy, safe transport from gig to gig. With the needs of modern bass players largely centered around volume and versatility, the LH500 is an ideal solution that gives you plenty of options to create the exact sound you’re looking for.

Features:

• 500 watts of power @ 4 ohms
• Classic 12AX7 High Voltage Class-A tube preamp circuit
• Bass and Treble Shelving, plus mid-peak EQ controls
• Selectable Brite switch for added high frequency response
• Selectable limiter switch with LED indicator
• Front panel XLR balanced direct output
• Rear panel 1/4″ effects loop
• 1/4″ output connectors
• 2-rackspace metal chassis with steel faceplate and handles

The post หัวแอมป์เบส Hartke LH500 Bass Head Amplifier 500W appeared first on soundspacethai.com.

ตู้ลำโพงเบสสำหรับต่อกับหัวแอมป์เบส Hartke 410XL เป็นตู้ลำโพงแบบ Dual-Chamber, Dual-Ported Cabinet ที่มีขนาดดอกลำโพง 10 นิ้ว จำนวน 4 ดอก Aluminum-Cone Bass Drivers ทนกำลังขับ 400 วัตต์ที่ 8 โอหม์ ตอบสนองความถี่ 30 Hz To 5 kHz, Parallel 1/4″ Inputs

The Hartke XL Series 410XL 400W 8ohm 4×10″ Aluminum Cone Bass Speaker Cab because of its carefully calibrated and tuned cabinet design along with its high-quality aluminum cone drivers. These cabinets produce a smooth response along with the clear, punchy attack that changed the sound of bass.

The 410XL features a twin chamber, dual-ported design. Housed in the cab are four 10-inch proprietary low frequency drivers that employ large voice coils, impregnated fabric surrounds and convex dust covers, all mounted in a heavy-duty steel frame. And with 400 watts of available power handling and a frequency response of 30 Hz to 5 kHz, this cabinet ensures professional performance and remarkable tone for any style of playing.

Built for the road, the 410XL uses heavy-duty plywood construction and is covered in rugged carpet. Additionally, a recessed jack plate and ergonomic metal handles make transporting this cab no sweat. With strength to endure and tone to amaze, the 410XL ensures a performance that will make mouths drop.

Features:

• Dual-Chamber, Dual-Ported Cabinet
• Four Hartke XL 10″ Aluminum-Cone Bass Drivers
• Power Handling: 400 Watts @ 8 Ohms
• Frequency Response: 30 Hz To 5 kHz
• Sensitivity: 98 dB @ 1 W/1 M
• Voice Coil: 1.5″
• Magnet Weight: 60 Oz.
• Parallel 1/4″ Inputs

The post ตู้ลำโพงเบส Hartke 410XL Bass Cabinet 4×10″ appeared first on soundspacethai.com.

ตู้ลำโพงเบสไฟฟ้าสำหรับต่อกับหัวแอมป์เบส Hartke HD410 เป็นตู้ลำโพงที่มีขนาดดอกลำโพง 10 นิ้ว 4 ดอก HyDrive Paper/Aluminum LF Driver เสียงแหลม 1 นิ้ว 1 ดอก HF Driver with 3-Position Switch ทนกำลังขับ 1000 วัตต์ที่ 8 โอหม์ RMS ตอบสนองความถี่ 50 Hz To 17 kHz

The post ตู้ลำโพงเบส Hartke HD410 Hydrive Bass Cabinet 4×10″ appeared first on soundspacethai.com.

ตู้ลำโพงเบสไฟฟ้าสำหรับต่อกับหัวแอมป์เบส Hartke VX410 เป็นตู้ลำโพงที่มีขนาดดอกลำโพง 10 นิ้ว 4 ดอก proprietary drivers เสียงแหลม 1 นิ้ว One horn loaded high frequency transducer ทนกำลังขับ 400 วัตต์ที่ 8 โอหม์ Ergonomic handles, Parallel 1/4″ Inputs

The Hartke VX410 4×10″ Bass Cabinet with 1″ High-Frequency Speaker is a 400W, 8 ohms bass speaker, and features four 10″ low frequency paper cone drivers and a high frequency transducer. The high efficiency low moving mass design allows for maximum output and plenty of headroom throughout the full range of the driver.

The cabinet is constructed of heavy-duty plywood, reinforced corners, recessed carry handles, a rugged covering, and a recessed jack cup to protect the 1/4″ input and the 1/4″ extension connectors.

Features:

• Heavy-duty plywood construction
• Four 10″ proprietary drivers
• One horn loaded high frequency transducer
• Power Handling: 400 watts @ 8 ohms
• Ergonomic handles, Parallel 1/4″ Inputs

The post ตู้ลำโพงเบส Hartke VX410 Bass Cabinet 4×10″ appeared first on soundspacethai.com.

ตู้ลำโพงเบสสำหรับต่อกับหัวแอมป์เบส Hartke 4.5XL เป็นตู้ลำโพงที่มีขนาดดอกลำโพง 10 นิ้ว 4 ดอก heavy-duty aluminum low-frequency drivers เสียงแหลม 5 นิ้ว 1 ดอก aluminum high-frequency driver ทนกำลังขับ 400 วัตต์ที่ 8 โอหม์ ตอบสนองความถี่ 30 Hz To 12 kHz

The Hartke 4.5XL 4×10″ Bass Cabinet with 5″ High-Frequency Speaker is a tuned, ported cabinet which encloses four 10″ aluminum-cone low-frequency drivers and a custom 5″ high-frequency speaker. The cabinet is built with a shockproof metal grill, reinforced corners, recessed carry handles, and a rugged covering.

The 4.5XL features power handling of 400W at 8Ω with a wide frequency response of 30Hz to 12kHz and provides an extension output for connecting additional speaker cabinets in parallel.

Features:

• 4 x 10″ heavy-duty aluminum low-frequency drivers
• 1 x 5″ aluminum high-frequency driver
• 3/4″ plywood construction
• Tuned front shelf port
• Perforated metal speaker grill
• Recessed metal handles
• Stacking corners
• Dual, parallel-wired 1/4″ jacks
• Covered in durable carpet

The post ตู้ลำโพงเบส Hartke 4.5XL Bass Cabinet 4×10″ appeared first on soundspacethai.com.

หัวแอมป์เบสไฟฟ้า Hartke HA5500 , Tube and solid state preamp sections, มีกำลังขับ 500 วัตต์ 4 ohms, 10-band graphic EQ,Passive and active input sections, Bass, treble, and contour controls, Variable compression, XLR direct out, Effects loop, Rack Ears included

Found on stages all over the world, the Hartke HA5500 bass amplifier is back in classic black. Yet, it retains all the same rock-solid performance and features as the original that have made it one of the most popular bass amplifiers of all time. The HA5500’s unique circuitry ensures that every nuance of your bass performance is faithfully reproduced.

Featuring two pre-amp input knobs for custom blending of tube and solid state tone and a ten-band graphic EQ, the HA5500 is ideal for the player who wants plenty of power and control. But we don’t stop there. A dedicated preset button allows you to set a equalization curve and two fully adjustable contour knobs provide even more shaping of your distinctive sound.

A built-in compressor adds real “punch” to your bass sound, and also allows you to smooth out volume differences between notes.Rugged construction and professional features make the HA5500 totally road-worthy. Two independent inputs accommodate both passive and active bass guitars. LEDs show you the settings of the graphic equalizer in low-light environments as well as a two-color LED that continuously shows the status of the compression circuitry in response to your playing.Electronically balanced direct output provides routing signal to professional mixing consoles for both live performance and recording environments.

A ground lift switch helps prevent hum or buzz from entering the signal, and a pre/post switch allows the direct signal to be derived either before or after the amp EQ section.With all the features you need for complete tonal control, along with ample power and rugged design, the HA5500 will ensure complete bass euphoria no matter what kind of music you play.

Features:

• 500 Watts of power at 4 ohms
• Tube and solid state preamp sections
• Passive and active input sections
• Bass, treble, and contour controls
• 10-band graphic EQ
• Variable compression
• XLR direct out
• Effects loop
• Rack Ears included

The post หัวแอมป์เบส Hartke HA5500 Bass Head Amplifier 500W appeared first on soundspacethai.com.

หัวแอมป์เบสไฟฟ้า Hartke HA3500 tube and solid-state preamps circuit, Selectable tube and solid-state preamps, มีกำลังขับ 350 วัตต์ 4 ohms, 250 วัตต์ 8 ohms, 10-band graphic EQ, Active and passive inputs, Rotary bass and treble contour controls

Found on stages all over the world, the Hartke 3500 bass amplifier is back in classic black. Yet, it retains all the same rock-solid performance and features as the original that have made it one of the most popular bass amplifiers of all time. The 3500’s unique circuitry ensures that every nuance of your bass performance is faithfully reproduced.

Featuring two Pre-Amp input knobs, allowing custom blending of tube and solid state tone, and ten-band graphic EQ, the 3500 is ideal for the player who wants plenty of power and control.

Features:

• 350 watts at 4 ohms, 250 watts at 8 ohms
• Selectable tube and solid-state preamps
• Active and passive inputs
• Rotary bass and treble contour controls
• 10-band graphic EQ
• Balanced XLR direct output
• Rack Ears included

The post หัวแอมป์เบส Hartke HA3500 Bass Head Amplifier 350W appeared first on soundspacethai.com.

หัวแอมป์เบสไฟฟ้า Hartke HA2500 Tube-emulation and solid-state preamp circuit, มีกำลังขับ 250 วัตต์ 4 ohms, 180 วัตต์ 8 ohms, 10-band graphic EQ, High Pass and Low Pass contour knobs, Built-in compressor, Active and Passive inputs, Effects loop Send and Return jacks

The Hartke HA2500 Bass Amplifier is a rackmountable 250W bass amplifier designed to amplify passive and active bass guitars in live performance and recording environments. The HA2500 features two pre-amplification input knobs to allow custom blending of tube and solid state tone, and a 10-band graphic equalization. The amplifier’s dedicated preset button allows you to set an equalization curve, and 2 adjustable contour knobs are designed to provide you with more sound-shaping possibilities.

The built-in compressor allows you to smooth out volume differences between notes. The amplifier also features LEDs that show you the settings of the graphic equalizer in low-light environments as well as a two-color LED that continuously shows the status of the compression circuitry in response to your playing. A ground lift switch is provided to prevent hum or buzz from entering the signal, and a pre/post switch allows the direct signal to be derived either before or after equalization.

Features:

• 250 watts at 4 ohms, 180 watts at 8 ohms
• Tube-emulation and solid-state preamp circuit
• 10-band graphic EQ
• High Pass and Low Pass contour knobs
• Built-in compressor
• Active and Passive inputs
• Protection relay circuitry
• Effects loop Send and Return jacks
• Unbalanced 1/4” Speaker Outputs
• Balanced Direct Out with Ground Lift and Pre/Post switches
• Rugged, roadworthy construction

The post หัวแอมป์เบส Hartke HA2500 Bass Head Amplifier 250W appeared first on soundspacethai.com.

แอมป์เบส Hartke HD150 เป็นแอมป์เบสที่มีขนาดดอกลำโพง 15 นิ้ว HyDrive Speaker เสียงแหลม 1 นิ้ว tweeter, กำลังขับ 150 วัตต์ rms, 7-Band Equalizer, Built-In Limiter, On-Board Effects Loop, Headphone Jack, Auxiliary Input, 1/8” stereo Aux input for stereo line level devices (MP3 players, drum machines, etc.)

The HD150 from Hartke is a combo amplifier capable of delivering 150W RMS. Its 1×15″ cabinet houses a 15″ HyDrive paper and aluminum cone driver and a 1″ tweeter to boot. After connecting your instrument to its 1/4″ jack, you can manipulate the signal with bass, midrange, and treble controls, as well as a 7-band graphic EQ which lets you dive deeper into specific frequencies.

The amplifier gives you 1/4″ I/Os for looping outboard gear into your signal, as well as a headphone output, the use of which mutes the amplifier, and thus, enables you to practice silently through headphones. A 1/8″ line-level input allows you to plug in CD players, MP3 players, or any compatible playback device, giving you the opportunity to practice along with a background track of your choice.

An XLR DI output will let you route signal to mixers, interfaces, or PAs. Side handles allow you to grip the amplifier for transport, and on-board casters make wheeling the combo around relatively easy to do. This amplifier is suitable for use in rehearsal spaces, practice sessions, and small venues.

Features:

• 150 watts of output power
• 15” HyDrive paper and aluminum cone driver
• 1” tweeter
• Top-mounted amplifier with Volume, Bass, Mid and Treble controls
• 7-band graphic EQ
• 1⁄4” input for active and passive bass guitars
• 1/8” stereo Aux input for stereo line level devices (MP3 players, drum machines, etc.)
• 1⁄4” headphone output
• XLR direct output
• Built-in limiter, Effects loop
• Perforated metal grille
• Side carry handles, Casters included

The post ตู้แอมป์เบส Hartke HD150 Bass Combo Amp 15″ appeared first on soundspacethai.com.