อุปกรณ์บัฟเฟอร์สัญญาณ Radial StageBug SB-15, 100% Discrete Class-A Buffer, Drag Control Load Correction, Drives Pedals to 50′, Converts Two 9V Supplies to 15 VDC, Drag Control load correction adjusts the load on the pickup for a more natural sound and feel

The Stagebug SB-15 is a class-A signal buffer designed to sit at the beginning of the signal chain and drive multiple pedals without added noise or signal loss. It also converts two 9V power outputs to a 15V supply as an alternative way to power Radial and Tonebone 15V products.

Features:

• Hi-Z 1/4″ guitar input connects to a class-A buffer circuit
• 9 VDC In-1 provides power to the Tailbone class-A active buffer circuit
• 9 VDC In-2 is used with 9 VDC In-1 to increase input power so that the Tailbone can deliver 15V to a Tonebone pedal
• Enclosure is made from 14-gauge steel to protect sensitive internal electronics while shielding against magnetic fields
• 1/4″ buffer output connects to pedals and amp, allowing longer cable run without noise (up to 50′)
• 15 VDC, 400mA output designed to supply Tonebone pedals using two 9 VDC supplies as the power source
• Durable powder-coat finish
• Double-sided, military-grade circuit board features through-hole solder points for extra durability, and full-surface ground plane to reduce susceptibility to noise
• Stand-offs are made from steel and pressed into the outer casing to ensure proper retention of the circuit board
• Connectors made from glass-filled nylon are insulated for reduced noise and feature nickel-silver contacts that will not tarnish
• Dual potentiometer doubles up solder points for greater durability, and steel casing with steel shaft and retention nut does not bend when under stress
• Drag Control load correction adjusts the load on the pickup for a more natural sound and feel

The post Radial StageBug SB-15 Tailbone Signal Buffer appeared first on soundspacethai.com.

ปรีแอมป์ Radial PZ-Pro, 2-channel Acoustic Preamp and DI with Phantom Power, 3 Band EQ, Switchable Filter, Piezo boost brings up your signal, FX Loop, and Wet/Dry Blend, XLR input with available phantom power on channel 2

The PZ-Pro is designed for instrumentalists and performers who take a no-compromise approach when it comes to tone, both on stage and in the recording studio. Dual input channels allow you to switch between or blend together two sources, with full control over the sound of each input.

Each channel has its own semi-parametric equalizer section and input level, along with individual filter controls to reduce feedback on stage. The second channel of the PZ-Pro also features a microphone input to allow any dynamic or condenser microphone to be used, including clip-on instrument mics or even vocal microphones.

An FX Loop with a wet/dry knob provides the ability to blend in as much or as little pedal effects as desired, with a footswitch to bring them in and out of the signal chain at a moment’s notice. Finally, once your tone is completely dialed-in, balanced XLR direct outs feed the PA system or a recording interface, with both Pre-EQ and Post-EQ outputs available.

Features:

• 2-channel acoustic preamp and DI
• Independent EQ controls let you shape each input signal individually
• 3-band EQ helps you slot into the mix with ease
• Hi-Pass and Notch filters cut out feedback and unwanted boom
• Assignable effects loops and wet/dry blend knob give you total control over any effects
• XLR input and switchable phantom power (channel 2) accommodate microphones of all kinds
• Piezo boost brings up your signal

The post อะคูสติกปรีแอมป์ Radial PZ-Pro Acoustic Instrument Preamp appeared first on soundspacethai.com.

ปรีแอมป์ Radial Tonebone PZ-Pre, 2-channel Instrument Preamp with Boost, 2 Piezo Boosters, 3-band EQ, Notch Filter, High-pass Filter, Separate DIs for House Mix and Monitoring, and Tuner Out with Footswitchable Mute

The Radial PZ-Pre is a powerful acoustic instrument preamplifier. The magic lies in the combination of high performance 100% discrete class-A PZB piezo boosters, an ultra-quiet preamp circuit that will adapt to any pickup system and a host of connectivity options that will put you in total control.

The PZ-Pre is equipped with two inputs for quick instrument changes on stage, or, for blending two pickups together. Powerful semi-parametric EQ and feedback eliminating controls allow the user to fine-tune their sound while eliminating troublesome frequencies.

Offering both pre and post EQ direct box outputs, the PZ-Pre can be used send a dry signal to the house and performer tailored sound to monitors.

Features:

• Two channels
• Separate piezo boosters for each channel
• 3-band EQ with semi-parametric mid
• Notch filter
• highpass Filter
• Pre-EQ balanced DI out for FOH mix
• Post EQ and effects loop balanced DI out for in-ear monitoring or on-stage wedges
• Tuner out with foot switch mute
• Personal guitar amp out
• Power supply included

The post อะคูสติกปรีแอมป์Radial PZ-Pre Acoustic Instrument Preamp appeared first on soundspacethai.com.

ปรีแอมป์ Radial Tonebone PZ-Deluxe, Acoustic Instrument Preamp with Boost, Piezo Booster, 3-band Semi-parametric EQ, High-pass Filter, DI, Boost Footswitch, and Tuner Out with Footswitchable Mute, Ground lift on XLR output

The PZ-Deluxe is an instrument preamp with a low noise front end that is capable of exceptional dynamics to adapt to all instruments including acoustic guitar, upright bass, mandolin and violin no matter what type of pickup system is being used.

Powerful EQ controls allow you to shape your tone through the PA and a stage amp, with a low cut filter and 180° polarity reverse switches to help eliminate feedback on stage.

A special PZB gain stage can be activated for use with instruments that have piezo transducers, increasing the input impedance to 10 meg ohms to eliminate the squawk and harshness that are sometimes associated with those pickup systems.

The PZ-Deluxe also features a high quality Radial DI to provide a balanced output that can drive cables of over 100 meters (300ft) without noise into the PA system, and built-in mute and boost footswitches give you instant control for solos, instrument changeovers, or silent tune-ups on stage.

Features:

• A powerful preamp designed for acoustic instruments
• 3-band semi-parametric EQ to dial in your perfect sound
• Mute and boost footswitches
• Direct box to feed PAs and mixers
• Ground lift on XLR output

The post อะคูสติกปรีแอมป์ Radial Tonebone PZ-Deluxe Acoustic Instrument Preamp appeared first on soundspacethai.com.

อุปกรณ์แปลงสัญญานเสียง BLUSTREAM DA11USB, เข้ารหัสเสียง USB เป็น Dante Digital, ถอดรหัส Dante Digital เป็นเสียง USB, เลือกเสียง USB-B / USB-C ได้, รองรับ Class 3 IEEE 802.3af PoE, รองรับอัตราสุ่มตัวอย่าง 44.1 และ 48kHz ที่ 16 บิต, การส่งผ่านเสียง AES67 RTP

The Blustream DA11USB Dante USB Audio Encoder/Decoder encodes 2-channel USB audio to a Dante digital signal, and it decodes a Dante digital signal to 2-channel USB audio. It also supports AES67 RTP audio transport. Featuring RJ45 and USB connections, the DA11USB can be powered over PoE or bus-powered from a USB device.

Features:

• Encodes 2ch USB audio to Dante® digital signal
• Decodes a mono Dante® digital signal to USB audio
• Selectable USB audio between USB Type-B and USB-C inputs
• Compliant with USB Audio Device Class Specification V1.0
• Supports 44.1 & 48kHz sample rates @ 16-bit
• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
• Supports AES67 RTP audio transport
• Features Class 3 IEEE 802.3af PoE for powering of product from any PoE switch
• Supports power via 5V USB where network switch does not support PoE

The post BLUSTREAM DA11USB Dante USB Audio Encoder/Decoder appeared first on soundspacethai.com.

เครื่องสลับสัญญาณ BLUSTREAM CMX88CS HDMI แบบ 8×8 พร้อมถอดสัญญาณเสียง 8x HDMI inputs which can be independently routed to 8x HDMI outputs, Supports 4K UHD video including HDR, Control via front panel, IR, RS-232 & TCP/IP

Our Contractor CMX88CS 4K HDMI Matrix offers unprecedented performance and value for the custom installation market.  The CMX88CS supports HDMI2.0 with HDCP2.2, allowing distribution of eight HDMI sources to eight displays.

This enables all sources to be viewed as required within a matrix configuration. The unit transmits all HDMI resolutions up to and including 4K 60Hz 4:4:4. The 8-Way matrix also includes audio breakout, EDID management and a web browser interface module for control and configuration of the matrix.

Features:

• Features 8x HDMI inputs which can be independently routed to 8x HDMI outputs
• Supports 4K UHD video including HDR (up to 4K @60Hz 4:4:4)
• Independent video down conversion on all HDMI outputs allowing a display only capable of supporting lower 4K video resolutions (4K 60Hz 4:2:0) to receive 4K 60Hz 4:4:4 video content while still showing maximum original 4K UHD resolution on remaining outputs
• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission
• HDMI audio breakout to associated output analogue L/R audio and optical digital outputs concurrently
• Web interface module for control and configuration of the Matrix
• Control via front panel, IR, RS-232 & TCP/IP
• 3rd party drivers available for all major home control brands
• Advanced EDID management
• HDCP 2.2 compliant

The post BLUSTREAM CMX88CS 8×8 4K HDMI 2.0 Matrix appeared first on soundspacethai.com.